Jump to content



Learn appliance repair at the Samurai Tech Academy.  Learn more.  Earn more.


Parts Search
Site Search

FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Welcome to Appliantology.org, the Web's Premiere Appliance Repair Resource!

The world-famous Samurai Appliance Repair Forums


To get started, click here.


Already a member of Appliantology? Just sign in with your username and password in the upper right-hand corner of the screen.

 


Samurai Appliance Repair Man's Blog



How to troubleshoot an LG WM1814CW washer that keeps shutting down mid-cycle without an error code

Posted by Samurai Appliance Repair Man, in Washing Machine Repair 04 October 2011 · 1,530 views

Sublime Master of Appliantology john63 wrote:

Check the plug connections behind the JOG DIAL of the Control Panel.


Check the plugs on the MAIN BOARD for good connections/no damaged wires.

If all look good---replace the MAIN BOARD.

Part link ==> http://www.repaircli...EC1118A/1268301



Source: LG WM1814CW Shutting down without error code


How to retrieve the stored error codes in a Frigidaire stackable dryer

Posted by Samurai Appliance Repair Man, in Dryer Repair 03 October 2011 · 1,662 views
Frigidaire, dryer, error codes
Grand Master RegUS_PatOff wrote:

READING ERROR CODES

1. Rotate cycle selector knob to the 3 O’clock position.
2. Press and hold the Select and Pause Cancel buttons simultaneously for six seconds.
3. Immediately after, press and hold the START and Pause Cancel buttons simultaneously for 4 seconds.
4. Rotate the cycle selector knob to the 2 O’clock position.
The four indicator lights of Drying, Cool Down, Wrinkle Rid (Press Saver), and Clean Lint Filter
will flash the number of times for the first digit of the code
and the START indicator light will flash the number of times for the second digit.
Take separate counts of each indicator light, then repeat to confirm in order to be accurate in identifying the proper error code.
The code is obtained by counting the number of times the lights flash.
Example E24: The four indicator lights would flash twice indicating the 2
and the START indicator light will flash four times indicating the 4.
The four indicator lights and the START indicator light start flashing at the same time.
The control will pause for 2 seconds, then repeat the code.

To move on to the next code, press the OPTIONS button.

To exit this mode, simultaneously press and hold the Select and Pause Cancel buttons for six seconds.



Source: Frigidaire stackable dryer FEQB4000FS1 runs but no heat


How to fix a Whirlpool Duet washer with an F06 error code

Posted by Samurai Appliance Repair Man, in Washing Machine Repair 02 October 2011 · 5,733 views
Whirlpool, Duet, washer, F06
appl.tech.29501 wrote:


An F06 is usually the motor control board. And yes there could be a bad connection at the plug. You can pull the motor control out and inspect the solder joints on the board. Although usually the board will require replacement I have heard of people cleaning the board and connections with electronics cleaner and the problem was solved.



http://www.repaircli...8182706/1184161

Posted Image



Source: whirlpool duet #ghw9300pw


How to enter quick test mode in a Maytag electric double wall oven

Posted by Samurai Appliance Repair Man, in Oven-Range-Stove Repair 01 October 2011 · 1,481 views
Maytag, wall oven
RegUS_PatOff wrote:

Follow procedure below to use the quick test mode.

Entries must be made within 32 seconds of each other or the control will exit the quick test mode.
1. Press and hold CANCEL and BROIL pads for 3 seconds.
2. Once the control has entered the “Quick Test” mode, release both pads.
3. Press each of the following pads indicated in the table below.
NOTE: First time one of following pads are pressed it will activate the response.
The second time the pad is pressed it will deactivate the response.
Display will indicate the following:
Pad Response
BAKE................................... Bake DLB and Bake relay activated
BROIL.................................. Broil DLB and Broil relay activated
KEEP WARM ...................... Bake DLB and Broil DLB activated
CONVECT BAKE ................ Convection Fan on high speed
CONVECT ROAST ............. Cooling Fan activated
CLEAN................................. MDL relay activated
COOK & HOLD ................... Displays last diagnostic code
FAVORITE .......................... Displays EEPROM version number
TIMER ................................. Displays main code version number
CLOCK................................ All display segments illuminated
OVEN LIGHT.......................Oven light activated
CANCEL.............................. Exit Quick Test mode
1........................................... Even segments on
2...........................................Odd segments on
3........................................... Convection Ring activated; Convection Ring DLB activated
4........................................... Bake relay activated
5........................................... Broil relay activated
6........................................... Convection relay activated



Source: Maytag electric double wall oven MEW6630DDS is only beeping and not functioning


How to retrieve the diagnostic codes stored in the control board of a Maytag electric double wall oven

Posted by Samurai Appliance Repair Man, in Oven-Range-Stove Repair 01 October 2011 · 1,568 views
Maytag, wall oven
Grand Master Reg reads us the keypad dance:

Follow procedure below to use the quick test mode.

Entries must be made within 32 seconds of each other or the control will exit the quick test mode.
1. Press and hold CANCEL and BROIL pads for 3 seconds.
2. Once the control has entered the “Quick Test” mode, release both pads.
3. Press the AUTOSET button ..... Steps through last 5 diagnostic codes


Source: Maytag electric double wall oven MEW6630DDS is only beeping and not functioning






Like - Plus - View - Connect

Facebook-icon50x50.png google-plus-icon-50x50.png YouTube-icon50x50.png linkedin-icon-50x50.png

Find Parts & Diagrams Here

Looking for Appliance Parts? Enter your model number, part number, or even a part description and find it here. 365-day return policy on all parts purchased here, even electrical parts that have been installed!

Search My Blog

Latest Visitors

Random Album Image

Can you Believe that Blue?

23 user(s) viewing

0 members, 19 guests, 0 anonymous users


Bing (3), Google (1)


FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

Your Sometimes-Lucid Host:
Samurai Appliance Repair Man
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."


The Appliance Guru | Master Samurai Tech

Real Time Analytics