Samurai Appliance Repair Man's Blog

KEYSWITCH RESISTANCE CHECK TABLE

KEY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+Pos. Lead – Neg. Lead

DELAY HOURS  . . . . . . . . . . . . . . . . . . . . . . . . . . . P1-12 . . . . P1-2
SMART WASH/ACCUSENSE/ ADAPTIVE WASH . . P1-13 . . . .  P1-2
SOAK & SCOUR/STEAM/STEAM SANI . . . . . . . . . P1-11 . . . .   P1-3
CANCEL/DRAIN . . . . . . . . . . . . . . . . . . . . .. . .  . . .P1-12  . . . .  P1-3
POTS & PANS/HEAVY. . . . . . . . . . . . . . . .. . . .  . . P1-13 . . . .   P1-3
HIGH TEMP. . . . . . . . . . . . . . . . . . . . . . . . . . . .. .. P1-11 . . . .   P1-4
START/RESUME. . . . . . . . . . . . . . . . . . . .  . . . .  . . P1-12 . . . .   P1-4
NORMAL WASH/NORMAL. . . . . . . . . . . . . . . ..  . . P1-13 . . . .   P1-4
SANI RINSE. . . . . . . . . . . . . . . . . . . . . . . . . . . .. . P1-11 . . . .   P1-5
TURBO/PRO SCRUB/POWER SCOUR. . . . . . . . . . P1-12 . . . .   P1-5
CHINA/LIGHT. . . . . . . . . . . . . . . . . . . . . . .  . .. . . . . P1-13 . . . .   P1-5
HEATED DRY. . .  . . . . . . . . . . . . . . . . . . . . .  . . . . . P1-11 . . . .   P1-6
RINSE ONLY/QUICK RINSE. . . . . . . . . . . .. . . . .. . . P1-12 . . . .   P1-6
GLASS XPRESS/FAST WASH/ QUICK CLEANUP . . P1-13 . . . .   P1-6

Source: Whirlpool  DU1145XTPQA Quiet Partner II Dishwasher Not starting

Here's something that maybe of use to someone.

A system to attach the dishwasher to granite or other rock type counter tops without trying to drill and risk damage
to the expensive counter top material.

http://www.granitegrabbers.com/

Just happened to run across these being sold on E-bay and found this website by searching google.

It appears from the google search there is a real need for this product and it's not readily known about yet.

Source: Mounting a dishwasher to granite counter tops

it does not include a copy of the notoriously cryptic and famously useless Asko wiring diagram.

ᾏşқő щΐяîйģ đїẵğяǻмš ặяз ήỗŧởѓỉọữşŁỷ ςяўÞťĩç.
from asko-dishwasher-D1706-1716-dw952.pdf
click on picture to enlarge
right-click to save

Source: Asko 1385 Wiring Diagram picture

My Maytag MDB7100AWW Dishwasher recently began stopping mid-cycle.

On investigation I noticed that when this occurred, the "Clean" & "Light Wash" LED's were flashing after the failure.

This error code indicates "low motor current." (Code sheet found inside Dishwasher lower front panel.)

I opened up the panel behind the door and had a look at the circuit board. The two largest resistors on the board showed signs of high temperature on the board underneath them. When I unsnapped the board and looked on the reverse side, I noticed evidence of cold soldered and  arcing pins. The pins are from the two black relays nearest the contacts where the connecters plug into the board .

The motor appeared to be in perfect condition, so I ordered a new board from Repair Clinic. Fedex delivered overnight and the dishwasher is working like new again.

Looks like the "low motor current" error code was caused by the failing control board and had nothing to do with the motor.

Source: Maytag MDB7100AWW  Dishwasher Failure

Part link for the control board==> http://www.repaircli...mber=MDB7100AWW

This service Flash is what you are looking for

The Squeeker

Source: Frigidaire Dishwasher Howls Like it's Possessed