Jump to content

Learn appliance repair at the Samurai Tech Academy.  Learn more.  Earn more.

Parts Search
Site Search

FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact | Podcast

Welcome to Appliantology.org, the Web's Premiere Appliance Repair Resource!

The world-famous Samurai Appliance Repair Forums

To get started, click here.

Already a member of Appliantology? Just sign in with your username and password in the upper right-hand corner of the screen.



How to fix a Samsung DMR57 or DMR78 dishwasher making a grinding noise and error code 9E

Posted by Samurai Appliance Repair Man , in Dishwasher Repair 05 October 2011 · 4,817 views

Samsung dishwasher 9E grinding noise
Sublime Master john63 reveals the kata for this encounter:

<<<There is a grinding noise when first started up>>>


Many Samsung DMR57 & DMR78 dishwashers are known for developing a rattling/grinding noise during DRAIN MODE.

This is usually caused by a broken plastic mounting tab from the upper rack ADJUSTERS.

Each side of the upper rack has a tan/gray square RACK ADJUSTER---after a mounting tab (or 2) breaks off---this piece of plastic eventually ends up in the DRAIN PUMP HOUSING.

The DRAIN MOTOR should be removed to inspect for debris.


<<<after a minute or two I get 9e error code>>>


A normal amount of water in a DMR78 dishwasher would be---at about 1 inch past the HEATER SHIELD in the tub.

If you've tested the SWITCHES on the LOW LEVEL SENSOR---then they're not at fault.

Press the following buttons at the *same* time:


The word "ALL" appears for 3 seconds followed by "t1"

(NOTE: Test #1 checks the functions of the INLET VALVE--FLOW METER--LOW LEVEL SENSOR)

Press the DELAY START button---the DRAIN MOTOR will run for 45 seconds. Then---water will enter the tub.

When the PULSE COUNT (on the display) reaches "660" or greater---press the NORMAL button four times.

A flashing "t5" will be displayed & water will drain for 30 seconds. After 30 seconds---the "t5" will stop flashing.

Press the NORMAL button again---"t6" will be displayed. The word "OFF" should appear in the control panel display---indicating that the LOW LEVEL SENSOR SWITCH is in the correct position for *No Water* in tub.

If the INLET VALVE--LOW LEVEL SENSOR--FLOW METER function normally----replace the MAIN BOARD.

Source: Samsung dmr78ahs dishwasher grinding noise and error code 9e

Like - Plus - View - Connect

Facebook-icon50x50.png google-plus-icon-50x50.png YouTube-icon50x50.png linkedin-icon-50x50.png

Appliance Tech Training Scholarships for Veterans


Search My Blog

Recent Comments

Latest Visitors

  • Photo
    Today, 05:33 AM
  • Photo
    Horse player
    Yesterday, 10:50 PM
  • Photo
    Yesterday, 10:46 PM
  • Photo
    Yesterday, 08:53 PM
  • Photo
    Yesterday, 03:32 PM
  • Photo
    Yesterday, 02:34 PM
  • Photo
    Yesterday, 01:23 PM
  • Photo
    Rodgers Appl.
    Yesterday, 08:25 AM
  • Photo
    Yesterday, 08:23 AM
  • Photo
    11 Oct 2015 - 21:17

Random Album Image

Apprentice Of The Minute Award:  Chief Apprentice Appliantologist snelljm

25 user(s) viewing

0 members, 23 guests, 0 anonymous users

Google (2)

FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact | Podcast

Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

Your Sometimes-Lucid Host:
Samurai Appliance Repair Man
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."

The Appliance Guru | Master Samurai Tech

Real Time Analytics