Jump to content



Learn appliance repair at the Samurai Tech Academy.  Learn more.  Earn more.


Parts Search
Site Search

FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Welcome to Appliantology.org, the Web's Premiere Appliance Repair Resource!

The world-famous Samurai Appliance Repair Forums


To get started, click here.


Already a member of the Appliantology Academy? Just sign in with your username and password in the upper right-hand corner of the screen.

 






How to fix a Samsung DMR57 or DMR78 dishwasher making a grinding noise and error code 9E

Posted by Samurai Appliance Repair Man, in Dishwasher Repair 05 October 2011 · 3,821 views

Samsung dishwasher 9E grinding noise
Sublime Master john63 reveals the kata for this encounter:

<<<There is a grinding noise when first started up>>>


*************************

Many Samsung DMR57 & DMR78 dishwashers are known for developing a rattling/grinding noise during DRAIN MODE.

This is usually caused by a broken plastic mounting tab from the upper rack ADJUSTERS.

Each side of the upper rack has a tan/gray square RACK ADJUSTER---after a mounting tab (or 2) breaks off---this piece of plastic eventually ends up in the DRAIN PUMP HOUSING.

The DRAIN MOTOR should be removed to inspect for debris.

******************************

<<<after a minute or two I get 9e error code>>>

******************************

A normal amount of water in a DMR78 dishwasher would be---at about 1 inch past the HEATER SHIELD in the tub.

If you've tested the SWITCHES on the LOW LEVEL SENSOR---then they're not at fault.

Press the following buttons at the *same* time:

DELAY START--NORMAL--POWER(button)

The word "ALL" appears for 3 seconds followed by "t1"

(NOTE: Test #1 checks the functions of the INLET VALVE--FLOW METER--LOW LEVEL SENSOR)

Press the DELAY START button---the DRAIN MOTOR will run for 45 seconds. Then---water will enter the tub.

When the PULSE COUNT (on the display) reaches "660" or greater---press the NORMAL button four times.

A flashing "t5" will be displayed & water will drain for 30 seconds. After 30 seconds---the "t5" will stop flashing.

Press the NORMAL button again---"t6" will be displayed. The word "OFF" should appear in the control panel display---indicating that the LOW LEVEL SENSOR SWITCH is in the correct position for *No Water* in tub.

If the INLET VALVE--LOW LEVEL SENSOR--FLOW METER function normally----replace the MAIN BOARD.



Source: Samsung dmr78ahs dishwasher grinding noise and error code 9e




Like - Plus - Connect - View

Facebook-icon50x50.png google-plus-icon-50x50.png YouTube-icon50x50.png

Find Parts & Diagrams Here

Looking for Appliance Parts? Enter your model number, part number, or even a part description and find it here. 365-day return policy on all parts purchased here, even electrical parts that have been installed!

Search My Blog

Latest Visitors

Random Album Image

What Washer and Dryer would the Samurai Buy?

35 user(s) viewing

2 members, 33 guests, 0 anonymous users


dgkula, goorozzy


FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

Your Sometimes-Lucid Host:
Samurai Appliance Repair Man
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."


The Appliance Guru | Master Samurai Tech

Real Time Analytics