Blogs

As most people know after a quick search of the Internet, the LE error code in LG front-load washers is usually caused by a bad hall sensor, also called a rotor position sensor or RPS. The hall sensor is easy to test and replace, see this post at Fixitnow.com for detailed instructions.

Okay, let's say you replaced the hall sensor because you believed it was bad and you're still getting that ding-dang infernal LE error code. What's a brutha to do?

First off, don't go into a blind parts changing monkey panic and start replacing parts that just never fail on their own like the stator. Take a breath, unbunch them panties, and come with me now as we step through the three most likely causes for the LE error code that persists even after replacing the hall sensor.

1. Using too much or the wrong kind of detergent

Using non-HE (high efficiency) detergent in any HE washing machine (which includes ALL front loaders, regardless of brand or model) is a big Bozo No-No. You can't just use less of the non-HE stuff because washing with low water requires different detergent chemistry than washing with boocoo water.

The biggest problem with using non-HE detergent is sudsing. Excessive sudsing can cause problems in HE washers by “cushioning” — or even preventing — the tumbling action. HE detergents also hold soils and dyes in suspension in low water volumes, so they don’t re-deposit onto cleaned clothes. This means that if you’re using non-HE detergents in your front-loading washer, you’re wearing poopy germs and other ca-ca on your clothes right now and you are one of the Great Unwashed. The inside of your washer will start smelling poopy, too. See my seminal tome, 9 Ways to Beat Odor Problems in Modern High-Efficiency Front Load and Top Load Washers, for more.

But the biggest problem with sudsing as it pertains to the LE error code in LG front loaders is that the excessive suds can trick out the control board because the load doesn't "feel" right (yes, the control board senses the load and its action) and so it throws an LE error code.

Note that using too much HE detergent can cause over-sudsing, too. Detergents are one those things where more is NOT better. You want just the right amount and no more. So what is the right amount? Well, first off, disregard the idiot directions on the box. Naturally they're going to tell you to use more so you'll have to buy more sooner. And don't fill it to the MAX line in the dispenser. Start with the following amounts of HE detergent and adjust based on your water hardness; more for hard water, less for soft water (read more about water hardness and how to check yours in this post, The Hard Facts about Hard Water and Your Appliances):


- Regular HE detergent: 2 tablespoons per normal wash load

- HE 2X (double concentrated): 1 tablespoon

- HE 3X (triple concentrated): 1 teaspoon



2) Broken wire harness

If you're sure that you (or your customer, if you're a professional appliantologist) are using the correct type and amount of detergent then replace the motor wire harness at the back of the washer (the one underneath the motor). You can see it in the photo below:





Even though the wire harness may look fine, one of the wires inside may have broken over the years of use-- they's a whole lotta shakin' and gyratin' going on back there! Also, wire harnesses in dynamic environments like a front load washer can become intermittent in their conductivity. It may work in more quiescent parts of the cycle and then break continuity as the movement increases. This can break the data feedback from the hall sensor to the main control board and cause it to throw an LE error code.

A visual inspection of a wire harness doesn't give a full assessment of its integrity-- you have to measure continuity of each wire in that harness to know what's really going on.

Or just go ahead and replace the wire harness, it's inexpensive and easy to do.

3. The main control board may be bad

Emphasis on the "may" because this is actually the least likely scenario yet the first one that most techs will jump on in these situations. Lots of times, when the main control board in an LG washer goes bad, it's visible, like in this one:



It's usually the triacs, the power transistors, that get shorted out. If you see this, you better look for the problem elsewhere in the machine because something shorted and caused the triac to draw excessive current which burned it up.

But control boards absolutely do fail in non-visible ways, too. So if you're still getting the LE error code after you've replaced the hall sensor, you've ruled out detergent issues and replaced the wire harness, then the only thing you're left with is the main control board.

Here's a hearty and very satisfying casserole that in its original form is vegetarian, but is easy to convert to meaty if you like - just see the note at the end. This would be a great centerpiece for a Cinco de Mayo celebration, and much easier than an assembly-style meal like tacos or burritos (although those are fun if you have the time!)

Go from this...


to this...


It's so easy!
Ingredients:

• 2 jars salsa (use a good quality salsa, and choose the spiciness according to your taste. I use one mild and one medium, but I'm a little wimpy. Samurai would prefer it to be muy caliente!)
• 2 cans refried beans (I like Amy's brand, either traditional or black bean, usually found in the organic section of grocery stores)
• 1 package corn tortillas (look for organic, non-GMO. Healthiest brand is Food For Life's Sprouted Corn Tortillas, in the freezer section of many natural food stores or the organic section of some grocery stores.)
• 1 8-oz. package shredded cheese, jack or cheddar
• ½ bunch cilantro, chopped, optional
• sour cream, avocado, scallions, tomatoes, shredded lettuce... as many toppings as you like!

Directions:

Preheat oven to 350 deg. F.

In a 9 x 13 inch baking dish, spread about 1/2 a jar of salsa on the bottom.

Put a third of the corn tortillas on top of the salsa, breaking them up as necessary to fit in a single layer and cover the bottom as much as possible. A little overlapping is fine. Most packages come with either 10 or 12 tortillas, so you'll use 3 or 4 for each layer.

Spread one can of the refried beans over the tortillas, then the other 1/2 jar of salsa, then about 1/3 of the shredded cheese.  (These steps are pictured below - not that this is complicated, but pics are always fun!)

Repeat the layers of tortillas, beans, salsa, and cheese one more time.

Finish with a final layer of tortillas and the remaining salsa (smear around to cover the edges of the tortillas) and top with the cheese.

Cover the dish with foil and bake for about 40 minutes, until all bubbly. Remove the foil, add the cilantro, if using, and bake for another 5-10 minutes until the cheese on top is like you want it.

Serve with sour cream or greek-style yogurt, and other optional veggie toppings.

NOTE:

You can make this a meaty concoction by simply adding or substituting seasoned, cooked meat to/for the refried beans. For example, I prepared 2 pounds of ground beef with 1 packet of taco seasoning and used that in place of the beans. This meaty version does especially well with some chopped veggie toppings (tomatoes, scallions, lettuce, etc.), since it is so hearty. Make sure your baking dish is a deeper lasagna-style one, since this version is a little thicker!

Photo documentation of the complicated layering process  

Salsa


Tortillas


Refried Beans (and/or meat)


Salsa


Cheese


Then repeat those layers one more time (from tortillas through cheese), finish with final layer of tortillas, salsa, then cheese.  Here's what it looks like when done baking!  (I added the cilantro in the last 5 minutes or so of cooking.)