FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Kenmore washer will not spin
#1
Posted 09 April 2005 - 04:20 PM
My wife was doing a load of laundry. Came downstairs later to find the washer clicking away when the timer was on spin mode. I changed the speed dial and it had no affect. The washer will not spin and may not be agitating but did not check that to be sure. It does pump the water out of the tank. I disconnected everything and layed it onto its face so I could look under the washer. It is direct drive and the coupler looks to be in good condition. I rotated the couple around with my finger and the rubber center looks fine and so do the plastic pins.
I have read that the door switches can go bad but if that was so, would it be making the clicking noise. Seems to me it would be silent if the switch was bad.
Advice needed
#2
Posted 09 April 2005 - 04:51 PM
FAQs | Parts | Memberships | Consultations | Repair Videos | Newsletter | Beer Fund | Contact
#3
Posted 09 April 2005 - 05:29 PM
#4
Posted 09 April 2005 - 05:40 PM
FAQs | Parts | Memberships | Consultations | Repair Videos | Newsletter | Beer Fund | Contact
#5
Posted 10 April 2005 - 04:03 AM
#6
Posted 10 April 2005 - 07:46 AM
#7
Posted 10 April 2005 - 08:17 AM
This is an extremely insightful diagnostic question, Mad One. I wish I had asked it.How often does it click? Once every couple of seconds? Is it accompanied by something like the lights dimming? May be a bad connection at the motor.
FAQs | Parts | Memberships | Consultations | Repair Videos | Newsletter | Beer Fund | Contact
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Your Sometimes-Lucid Host:
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."
ApplianceGuru.com | AppliancePartsResource.com | Fixitnow.com













