Maytag Neptune - 1999
Posted 10 April 2005 - 04:16 PM
What are we missing besides our money. Do I just buy new and chalk one up to the art of being taken?
If I buy new, I am looking at the Whirlpool Duet or the Bosch Nexxt. What is your opinion.
But I would like to have what I have paid for to work!
Your great knowledge is requested.
Posted 10 April 2005 - 04:32 PM
I think the wise one would tell you to first look for panties stuck in the hose or pump itself.
This of course assuming the control board and motor have not fried again.
Posted 11 April 2005 - 12:30 AM
we have stinking standing water in the tub after every wash. We have replaced the "famed" circuit board and latch along with the pump (twice).
Does the washer spin? Usually, if there's standing water in the drum, the washer will not spin.
As to why there's standing water, Mastertech pointed you in the right direction. If I were on the service call, I'd set the washer to fill and then advance it to spin while holding the discharge hose just out of the drain pipe so I can watch the stream. If it's anemic or not the same diameter as the drain hose, then I know I have a restriction issue, probably panties in the suction hose of the pump. Easy fix.
Need parts? Call our Parts Department now! 877-803-7957
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users