Jump to content
LIMITED TIME OFFER: Use code 10YEARS10 to get 10% off your Appliantology membership. Click here for more ×
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Kenmore Error Codes help

atcherservice

By atcherservice
in DIY Appliance Repair Help

Recommended Posts

atcherservice

atcherservice

Posted
Posted

I have a Kenmore stove (665.75014101)with the broiler not working on a gas range(igniter fine). At first there were no error codes, we proceeded to install new control board. After installation the unit flashed an E1 and F2 error code. In the hopes of not being a parts changer we want to change out the temp sensor. I have a sneaking suspicion that the board might be bad. Any ideas?????

Link to comment
Share on other sites
  • Replies 3
  • Created
  • Last Reply
  • Team Samurai
Samurai Appliance Repair Man Sensei

Samurai Appliance Repair Man

Posted
  • Team Samurai
Posted

Sensors are easy enough to check that it awwta be checked regardless of what the fault code means:

http://fixitnow.com/2003/02/appliance-tip-of-day-oven-temperature.htm

Also, disconnect power from the range for a couple of minutes and then power it up again.

This range is built by Whirlpool. Here's a reference document of fault codes for all Whirlpool and Kitchenaid ranges.

Link to comment
Share on other sites
  • 2 weeks later...
jahjahbinks Kohai

jahjahbinks

Posted
Posted

sorry i`m late had to replace my H.D. and add more memory , so i can address these 665/ whirlpool questions  E1-F2 stuck touch pad  common problem with the 665 models and the 364 g.e. models (911.) but the erroe code is f7

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
×
×
  • Create New...