Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

pilot wont stay lite reliance 606 water heater


billy0510

Recommended Posts

a few weeks ago we had this problem start in which our gas water heaters pilot light would go out at times.  I cleaned the little air vent and lite the pilot it would stay on for a few hours and then go out again. this happened for a day and a half and then it started to work fine.  Now its back :yikes:its done it two times 4times today i just lite it again about ten minutes ago. I tried lighting it and letting the therm. turn it off several of times and it stayed lite.  But in a few hours it will probably be out again.

Link to comment
Share on other sites

  • Replies 2
  • Created
  • Last Reply

Do you have a full model number(located on the ID tag) and approximate age of the water heater? Is access to the burner sealed or does it have a removable cover (one that is not screwed in place)

If this is a newer style with FVIR(flame vapor ignition resistant) take a look at this technical bulletin to see how this works and then follow these cleaning instructions. The problem is usually a lack of combustion air or poor draft.

Link to comment
Share on other sites

If this is a relatively newer waterheater, (like within the last 4 years old), then you most likely have the newer sealed burner chamber style.

Here's an excert(sp?) from the manual:

FLAMMABLE VAPOR IGNITION RESISTANT DESIGN

This section will address the changes brought about by the introduction of FVIR compliant products. Other

than items mentioned here, the construction, installation, and service will remain the same as discussed in

the primary handbook.

The FVIR acronym stands for "Flammable Vapor Ignition Resistant." The AO Smith products are based on

"Corderite Combustion Containment" known as “C3 Technology™” . The C3 Technology design features a

sealed (from non designated air intake openings) combustion chamber and a "flame arrestor" component.

This class of residential gas water heaters meet the new ANSI standards and testing protocols (ANSI

Z21.10.1) established to deal with the accidental or unintended ignition of flammable vapors, such as those

emitted by gasoline. Virtually all gas-fired, atmospherically vented, residential water heaters manufactured

in the United States with BTU ratings of 75,000 or less are required to meet this new ANSI standard

effective July 1,2003. The current implementation schedule for C3 TECHNOLOGY compliant residential

gas-fired products is shown in the following table. These dates are subject to change.

A.O. Smith Water Products Company Technical Training Department ©2005 Ashland City, TN Page 15

This is a now new required design for safety to keep from igniting flammable vapors that may come in contact with the waterheater, (such as leaving a fuel container or greasey rags piled around the waterheater).

These units have a material, (Corderite), on the bottom where the fresh air enters and any flammable vapors would enter. In the case of flammable vapors igniting in the burner chamber the flames can't go back out thru the bottom because of the Corderite flame arrestor.

Recently I've been seeing a bunch of these just at the 2-4 years old point starting to plug up with dust and not letting enough air in for the burner to operate correctly.

As part of the safety the thermocouple assembly has a TCO, (Thermal cut-out), in it's circuit so that if a flammable vapor ignites in the heat chamber or if not enough air is entering to burn correctly the burner chamber will be hotter then when operating correctly and the pilot will be shutoff shutting the complete system down so as to not continue burning the flammable vapors or cause a carbon monoxide problem from the burner not burning with enough air. The TCO is a resetable device, it resets when the temp goes back down below a preset level. That is why you can relite it again after you have noticed that the you don't have hot water.

To clean these so they work properly again you will have to carefully remove the complete burner assembly. Then you will see a metal plate that is under the burner/pilot assembly. This plate has to be lifted up and proped up so as you can get a compressed air can or air gun inside and blow and debrie back down and out of the Corderite flame arrestor. I purchased a computer/electronic cleaning vacuum attachment from Harbor Frieght to be able to get into and under the flame arrestor vacuuming from the bottom air inlet openings while blowing down from the top.

Make sure the black plastic screen is cleaned good also and correctly installed back in place over the air inlet opening at the base of the waterheater. Keep the area around the waterheater cleaned and vacuumed on a regular bases also to keep as much dust and lint away as possible.

Here's a good service handbook that explains the operation and repair of these units, Service Handbook for Residential Gas & Electric Water Heaters CLICK HERE to download service & repair manual. Start reading at Page 15.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...