Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Armstrong Ultra sx80 Honeywell?


Colleenwalpert

Recommended Posts

Colleenwalpert

I have what is labled as an Armstrong Ultra sx80, I have found similar models labled "Honeywell" on the net.

My unit fires up fine. Gas, forced air. It will run for a very short while, when one of 2 electrial relays or the board (I can't tell which) makes a series of clicking noises and the unit shuts down. It is about 6 degrees under the hold temp currently, so it tries to fire up again... rinse and repeat...

Help!

Sorry, I left my camera at work or I would attach a photo.

Thanks!

Link to comment
Share on other sites

  • Replies 2
  • Created
  • Last Reply

Your flame sensor my not be functioning correctly and shutting down the furnace.  The shut down will initiate a retry.

What kind of thermostat are you using - digital, old school bimetal mercury?  If it is bimetal, the heat anticipator may not be properly set.

Link to comment
Share on other sites

Colleenwalpert

I took some steel wool to the flame sensor, and while doing so recognized this additional symptom:

When I apply pressure to the board on one of the two black switch boxes I can create the "clicking" noise and shut-down the system. If I play with it enough, I can get it to click on and stay on. I thought the problem went away until I reached desired temperature and the system shut down, never to start again. Bad board?

PS. I have a digital t-stat.

PPS. I had a great Lambic last night to ease my pain.

PPPS. Thanks so much for your help!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...