Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Dyson D17

Pippi

By Pippi
in DIY Appliance Repair Help

Recommended Posts

Pippi

Pippi

Posted
Posted

My friend brought over her Dyson D17 vacuum for me to look at,  It runs fine with the tools but to take it out of the upright position and vacuum with the power head you step on the area where the power head is located and you should be able to lower the handle for use.  Well the left side unlatches but the right side (sides in reference to standing behind the vacuum) remains locked and will not release.  Does anyone have any information on this.  I located a support page for dyson but they deal with the D12 not locking in the upright position but not one that is locked in the upright position. 

Noticed that vacuums are not on this site individually but thought someone might have an idea. 

Thanks Pip

 OOps I ment to post under General forum!!  Sorry

Link to comment
Share on other sites
  • Replies 0
  • Created
  • Last Reply

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
×
×
  • Create New...