FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
help with my GE washer
#1
Posted 13 April 2005 - 07:17 AM
ok now...the washer starts out fine.....but once it gets to that 6min cycle it starts to make a clicking noise....click click...click click....clik click...then it stops for about a minute and moves on to the next cycle.....but then when it gets to the rinse cycle it makes the clicking noise again while it fills up with water...and then when it goes to the final spin it finally stops clicking......i hope you know what im talking about...hehehehe.....any way what do you think the problem is?......thanks lucyyyy
#2
Posted 13 April 2005 - 09:41 AM
#3
Posted 13 April 2005 - 09:49 AM
http://www.partselect.com/assets/partimages/269899_1_M.jpg
Lots of LEDs to tell you where it is in the cycle. Like Manny says, we need to know where the noise is coming from. Tell us what you see, what you hear.
#4
Posted 13 April 2005 - 10:23 AM
#5
Posted 13 April 2005 - 11:08 AM
#6
Posted 14 April 2005 - 02:24 AM
You will find the pump down on the bottom of the washer in the front right corner, see if the noise is coming from the pump.
Most likely something like a coin or possibly a bra under wire has gotten lodged in the pump.
William Burk (Willie)
Willie's Budget Appliance Repair
Eureka, CA 95501
Willie's Budget Appliance Repair
Eureka, CA 95501
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Your Sometimes-Lucid Host:
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."
ApplianceGuru.com | AppliancePartsResource.com | Fixitnow.com













