Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

blower motor rgda 060 rheem

njgreg

By njgreg
in DIY Appliance Repair Help

Recommended Posts

njgreg

njgreg

Posted
Posted

 I have a rheem rgda 060 blower fan is going out will not start without me pushing it and it gets so hot it shuts down.  I have tried to cross reffrence to get a new motor but no such luck.  It is a 1/6 hp 2 speed, ge motor.

can anyone help i can get more info if needed

thx

Link to comment
Share on other sites
  • Replies 6
  • Created
  • Last Reply
RegUS_PatOff Sensei

RegUS_PatOff

Posted
Posted

any part numbers or other numbers on the motor ?

... might that be a  3-phase *hp-1/6*  rpm-1650*  ?

Link to comment
Share on other sites
dkpd1581 Sōhei

dkpd1581

Posted
Posted

Check to see if the capacitor is within 10% of the listed value.  If the motor will not start without you turning it, the capacitor is a likely and cheaper suspect.

Link to comment
Share on other sites
dkpd1581 Sōhei

dkpd1581

Posted
Posted

Check to see if the capacitor is within 10% of the listed value.  If the motor will not start without you turning it, the capacitor is a likely and cheaper suspect.

Link to comment
Share on other sites
njgreg

njgreg

Posted
  • Author
Posted

 sorry it took so long to get back been busy at work.

ok here is the info in the motor  mod 5ksp29kk1722s  part# 51-2182-01.

1/8 hp  2 speed.  no cap on the motor.

Link to comment
Share on other sites
RegUS_PatOff Sensei

RegUS_PatOff

Posted
Posted

MTG2806 MOT07715 MOT7715 5KSP29KK1722S 5KSP29KK1722 5KSP29HG7173 5KSP29HG7173S CAR4M434 CAR4UU83

Motor Info

"Capacitor Included Yes"

do you have model numbers on your old motor ?

Link to comment
Share on other sites
  • 2 months later...

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
×
×
  • Create New...