My GE Profile Fridge with water and ice dispenser in the door, started leaking. The plastic supply lines attached to the solenoid valves were cracked / broken. I ordered new supply lines from GE along with a new solenoid valve. I don't know how to approach the problem. I can't see where the lines go from the valve toward the front of the unit. Should I just replace the lines going from the solenoid valve to the front of the unit? Any suggestions would be appreciated. Model is the TFH30PRT. Thanks
:drowning:
Appliantology Parts Search Box
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Replacing leaking water supply lines on GE Profile Fridge
Started by mgrantom, Jul 16 2005 08:40 AM
4 replies to this topic
Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
#2
Samurai Appliance Repair Man
-
- Fermented Grand Master
-
- 24,347 posts
Your Sometimes-Lucid Host
- Location: USA
- Flavorite Brew:Kirin Ichiban
Posted 16 July 2005 - 11:05 PM
This is a cake-walk! Pull the refrigerator from the wall, unplug it, remove the rear service panel and get to work!
FAQs | Parts | Memberships | Consultations | Repair Videos | Newsletter | Beer Fund | Contact
#3
mgrantom
-
- Grasshopper
-
- 2 posts
Unsui
Posted 20 July 2005 - 03:36 AM
Ok, I pulled off the rear panel. The water in door line disappears into oblivion. (It looks like it goes through a small hole and I can't see past that. Is it accessed from the front kick plate panel? If so, how do you remove the front panel? Thanks
#4
Samurai Appliance Repair Man
-
- Fermented Grand Master
-
- 24,347 posts
Your Sometimes-Lucid Host
- Location: USA
- Flavorite Brew:Kirin Ichiban
Posted 20 July 2005 - 01:34 PM
Here's the new tubing for your refrigerator. Cut out the bad tubing, buy this in-line coupler and use it to splice in the new tubing to the existing tubing. Piece of cake.
FAQs | Parts | Memberships | Consultations | Repair Videos | Newsletter | Beer Fund | Contact
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
Your Sometimes-Lucid Host:
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."
ApplianceGuru.com | AppliancePartsResource.com | Fixitnow.com
