Jump to content
LIMITED TIME OFFER: Use code 10YEARS10 to get 10% off your Appliantology membership. Click here for more ×
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Comfortmaker GNK125N20A3 not getiing gas, how to test valve

JJ 109

By JJ 109
in DIY Appliance Repair Help

Recommended Posts

JJ 109

JJ 109

Posted
Posted

My furnace (Comfortmaker GNK125N20A3) will not get hot. The blower runs but the burner will not ignite. I do not believe the gas valve is opening, I cannot hear it click open.

Furthermore, when I remove the plug in gas line after the valve, there is no gas present.

Before I replace the valve I would like to check it somehow to ensure thats the cause of the issue, not something else that is wrong and not allowing it to open.

Thoughts?

Link to comment
Share on other sites
  • Replies 3
  • Created
  • Last Reply
JJ 109

JJ 109

Posted
  • Author
Posted

Update

I was checking the pressure switch so I jumpered the 24v supply (black) to the pressure switch feed (blue).

This cause the furnace to light. So though I had it. Then I checked resistance of the pressure switch. OC when the blower was on, CC with blower off. Hmmm, seems appropriate. Then I found a another thermal switch in series on the blower and it is also CC. So both are OK it would seem.

From there the wire goes to the board.

Not sure where to go form here yet. Does this mean the board is bad? Its a Honeywell ST9120c-4057.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
×
×
  • Create New...