Posted 16 April 2005 - 05:40 PM
Thank you for allowing me into your Dojo. I hope to be worthy.
I bought a Maytage Neptune washer and dryer in 2000 for about $1600 for the set. Such a deal. "Generally problem free" by current Maytag standards. But when you consider I do one or two loads a week and travel a lot, this has worked out to about 250 loads or $6.66 per load. Talk about Mark of the Beast. Since I bought them, the dryer has had to have the circuit board replaced; its on-board transformer cooked the board. Just today the washer S.T.B., gave up the ghost. I get a fault code that says "Lr", no spinning, partial draining, timer continues to run and stares at me. Stares. I am not paranoid. Stares. Laundry sits in there, wet dumb and happy. I go to your site and just tonight find out that I was not the only one wiping the drum and seals with Clorox wipes for mildew. The settlement seams to point out to a coupon to by another Maytag (fat chance at this point). But the Staber seems to have merit. I would love your thoughts.
I throw myself at your feet, Sensei. You are Ichiban.
(Bow, full, 30 degrees)
Posted 17 April 2005 - 02:04 AM
You most likely need a new motor and motor control board. They just came out with a revision on this for certain model numbers. Post your model number number and I can look it up for you.
Update: the tech bulletin I posted previously on the motor abd control board update is in this thread.
Posted 17 April 2005 - 03:00 AM
My vintage 2000 Maytag Neptune is a MAH5500B. Do you think it is worth sinking more $ into such a beast, or do I cut and run?
Thank you for all you are doing with this site!
Posted 17 April 2005 - 04:10 AM
Sounds like Maytag is saying (like GM) our new Vega will not rust)?????
Posted 17 April 2005 - 04:18 AM
Im getting used control boards for as little as 35 bucks, brand new motor and control board kits for under 75 bucks, used for 40.... and fixing up my own for cheap, and have enough spare parts to last till I die... LOL
We can repair some boards for as little as 2 bucks. Of course they are the older model 3000 and 4000. My message is that you shouldnt just abandon a ship because the cost of retail paid labor and parts are outrageous. Sometimes you have to do it yourself to salvage a bad situation. Jumping ship doesnt necessarily end up in joy. Ask those who sold thier Neptunes and bought a Calypso!
Posted 17 April 2005 - 04:31 AM
(For example, The South, home of Chicken Fried Steak, probably is not a good place to look for a heart transplant donor
I will give them one chance. Maybe. But if I were to buy a new horizontal axis washer, what do you see the least in terms of repair visits?
Thank you for all this!
Posted 17 April 2005 - 04:57 AM
As far as used parts, you are correct that many seek the same parts but many do not. IE, someone may need a motor and motor controller, some may need a machine control board and wax motor, others may need the outer tub assembly, etc. Not many machines will have all these items broken. But many owners are bailing on thier 1000.00 dollar machines for new because of huge estimates, rather than investigating possible do it yourself repairs. If you search the intenet right now you will find dozens of sites to help you with that, including this magnificent one right here.
Posted 17 April 2005 - 05:34 AM
Can you or anyone tell me what the fault code "Lr" means? That is what shows up on the LED display.
Could be it "Latch Release"?
To me it says "Loser" or "Lost Revolutions" because it does not spin.
My hope is that this points out to some of the circuit board issues in Mad Mac's helpful posting.
My model number is MAH 5500 BWW by the way.
Your Worthy Grasshoppa
Posted 17 April 2005 - 06:27 AM
Posted 17 April 2005 - 07:16 AM
Posted 20 December 2005 - 08:52 PM
Posted 21 December 2005 - 05:53 AM
Need parts? Call our Parts Department now! 877-803-7957
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users