Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

GE refridgerator GSH25UFRFWW / side by side


rprario

Recommended Posts

I'm looking for the wiring diagram that would have to do with replacing the mother board on this unit. Mother board P/N-200D4851G013. Yes this is part of the recalls for this heap of a product. My big issue isn't changing the board it's when the old board went bad it melted 3 wires that attach at the bottom of the board, J8,J9 & J11 connections were melted off completely so I am not exactly sure were they go back on.

On the board it has J8 as compressor, J9 as Defrost, and J11 as Line. Everything is foamed in so It's impossible to trace it. One wire is black, one is blue and the last has 2 wires connected to one which is brown.

By the way, the wiring diagram that is supposed to be behind the kick plate is not there.

I would be appreciative of any help. Thanks

Link to comment
Share on other sites

  • Replies 2
  • Created
  • Last Reply

Top Posters In This Topic

  • rprario

    2

  • RegUS_PatOff

    1

Popular Days

Top Posters In This Topic


×
×
  • Create New...