Jump to content
Click here to check out this guide.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Fisher and Paykel DD601 Service Manual


jasper6107

Recommended Posts

Samurai,

I am in need of a service manual for a Fisher and Paykel Dishdraw 601.

If you want to know why...... read on .... otherwise, if you are too busy or don't care why I need one, save yourself the time and don't read on.

 

MY situation.

 I have has a mouse or rat chew thru one of the black air hoses that is used to seal the unit. I have been able to scrounge another unit that wasn't working and was hoping to pinch the hose of it. Firstly, I wouldn't mind know what was exactly wrong with the unit I scrounged, (eg run some diags) so I can keep it for spare parts just in case I need them in the future. Secondly I would also like how to dismantle the system with out breaking various bit and pieces.

 

Regards

Jasper6107

Link to comment
Share on other sites

  • Replies 1
  • Created
  • Last Reply

Top Posters In This Topic

  • RegUS_PatOff

    1

  • jasper6107

    1

Top Posters In This Topic


×
×
  • Create New...