jcryanjr Posted May 11, 2009 Share Posted May 11, 2009 Front water/ice dispenser just started being flaky. Pulled cover and verified all three connectors were seated and contact switch for cup lever is good. Fridge is three years old with serial number HH416305. Might be part of the muthaboard recall.Looking to see if there are any diagnostics that I can run before doing battle with GE.Thanks.... Link to comment Share on other sites More sharing options...
RegUS_PatOff Posted May 11, 2009 Share Posted May 11, 2009 seems your serial number may not be covered, but others have had luck.GE_Refrig_Board.pdf give GE a callthis may be similar:Pages from 31-9072 Arctica Pro SxS.pdf Link to comment Share on other sites More sharing options...
jcryanjr Posted May 12, 2009 Author Share Posted May 12, 2009 Domo on the very fast response for the diagnostic codes. I received a failure on 0-3, temperature control panel to dispenser board communication. Everything else passed.I have sent GE an email regarding the extended warranty coverage. I'll keep my fingers crossed there and hope for success.In the meantime, assuming GE treats me like a homebrew gone bad, should I look at replacing the dispenser board first, or the muthaboard to return full operation to the water/ice dispenser?Many thanks..... Link to comment Share on other sites More sharing options...
Recommended Posts