Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Service manual for GE ARTICA refrigerator


DRT1200

Recommended Posts

Is there a general manual for the Artica series? 

I left the model number at the office.:?

Link to comment
Share on other sites

  • Replies 6
  • Created
  • Last Reply

Top Posters In This Topic

  • DRT1200

    4

  • Samurai Appliance Repair Man

    2

  • RegUS_PatOff

    1

Top Posters In This Topic

  • Team Samurai

I PMed you the download link. You've got mail!

Link to comment
Share on other sites

I forgot to mention this is a top mount Artica

Link to comment
Share on other sites

  • Team Samurai

I'll wait for the model number this time. :?

Meanwhile, feel free to peruse the manuals in the GE folder at the repair manual stash.

Link to comment
Share on other sites

PTS25HPARBSS Sorry about that I should have known better :(

I was going to post on the forum but the site says I am not cleared to post.

Hope this isnt out of line but this refer is out of commision for the weekend unless I can get it at least running. I have no display and I replaced the main bd and I get the same symtoms. The unit witll start up for about 3 secs and then shut down. Wait 5 mins and same thing happens.

Customer stated that display went down a month ago but it kept running ok. Of course , now a weekend holiday and they want cold beer. ( I can understand :D )

Got any ideas?

Regards

Link to comment
Share on other sites


×
×
  • Create New...