Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Bosch Model #SHU43C02UC/17


Recommended Posts

  • Replies 9
  • Created
  • Last Reply

Top Posters In This Topic

  • Norsky

    4

  • RegUS_PatOff

    1

  • matt832

    1

  • MRACraig

    1

Are there any repair manuals for similar types of Bosch machines? I am looking at repairing or replacing my main circulation pump and was hoping for some information on the best way to tear into it.

Thanks.

Link to comment
Share on other sites

  • Team Samurai

Slipped by me!

Download link sent.

Link to comment
Share on other sites

Norsky, please post your serial number so I can tell you if your dishwasher is one that has been recalled for a burnt control board.

Link to comment
Share on other sites

Thanks Scott

The control board was replaced under the recall program a few months back. I appreciate your concern. Here is the SN in case there is something else missed that I was not aware of: Model SHU43C02UC/17 FD SN FD831200346

Factory SN 10312008118000346 4

Great web site for the self inclined do-it-yourself-er.

Link to comment
Share on other sites

  • 2 months later...

I'm looking for the manual too.  Just getting around to repairing it after a freeze last winter.  Broke the fill valve, not sure if anything else went bad...

Link to comment
Share on other sites

  • 10 years later...
×
×
  • Create New...