Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Frigidaire Gallery Washer GSTR1670AS0


Recommended Posts

The machine will not spin the motor is good but I get no voltage on the 6 pin on pins 5 and 6. I have checked the wires they all look intact and secure. This leads me to the Door switch, is the a procedure for testing the switch before I order one.

Qutall/Ray

Link to comment
Share on other sites

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • Qutall

    2

  • Samurai Appliance Repair Man

    1

  • RegUS_PatOff

    1

Popular Days

Top Posters In This Topic

  • Team Samurai

Checking the door switch is a cinch... if you know which wires to check it on. Post the wiring diagram for your washer and I'll be able to tell you.

Link to comment
Share on other sites

 

GSTR1670AS0 Wiring Diagram

Pin 5 conects directly to the Line cord Neutral.

Pin 6 comes from the Line-Switch-Pull-ON and the Door Switch

Is the Door Lamp ON ?

Link to comment
Share on other sites


×
×
  • Create New...