Qutall Posted July 8, 2009 Share Posted July 8, 2009 The machine will not spin the motor is good but I get no voltage on the 6 pin on pins 5 and 6. I have checked the wires they all look intact and secure. This leads me to the Door switch, is the a procedure for testing the switch before I order one. Qutall/Ray Link to comment Share on other sites More sharing options...
Team Samurai Samurai Appliance Repair Man Posted July 8, 2009 Team Samurai Share Posted July 8, 2009 Checking the door switch is a cinch... if you know which wires to check it on. Post the wiring diagram for your washer and I'll be able to tell you. Link to comment Share on other sites More sharing options...
RegUS_PatOff Posted July 8, 2009 Share Posted July 8, 2009 GSTR1670AS0 Wiring DiagramPin 5 conects directly to the Line cord Neutral.Pin 6 comes from the Line-Switch-Pull-ON and the Door SwitchIs the Door Lamp ON ? Link to comment Share on other sites More sharing options...
Qutall Posted July 9, 2009 Author Share Posted July 9, 2009 Yes the door light is On Link to comment Share on other sites More sharing options...
Recommended Posts