FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Maytag range/oven
#41
Posted 22 September 2009 - 06:18 AM
If it turns out to be the ERC you may want to check out our website. We repair ERCs. We see a lot of intermittent F1 error cases (of course the meaning of F1 varies between models) but often they are caused by a component that fails in the safety circuit that controls the "DBL" (double break relay). We fully test the ERC and replace components that typically fail or are near end-of-life. We check the temperature calibration and we measure the contact resistance of the relays to help determine their condition.
It's not unusual for the F1 code to start randomly, then become more frequent over time and eventually become permanent.
Regards,
Bruce
www.fixyourboard.com
#42
Posted 22 September 2009 - 07:34 AM
If it turns out to be the ERC you may want to check out our website. We repair ERCs.
.
.
.
www.fixyourboard.com
Nice site, Bruce! Glad to know about you guys.
Welcome to our dojo, looking forward to seeing more of your art.
(PS - Have to close this old topic because it's unsecured.)
FAQs | Parts | Memberships | Consultations | Repair Videos | Newsletter | Beer Fund | Contact
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Your Sometimes-Lucid Host:
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."
ApplianceGuru.com | AppliancePartsResource.com | Fixitnow.com




This topic is locked









