Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Need Service Manual for KitchenAid Dishwasher - KUDD01DPPA


MARSfixinit

Recommended Posts

I'm a service tech that wants to make sure I'm troubleshooting this correctly.  Rinse light stays on and customer says Owners Manual says to contact Service Tech.

Link to comment
Share on other sites

  • Replies 4
  • Created
  • Last Reply

Top Posters In This Topic

  • MARSfixinit

    3

  • RegUS_PatOff

    2

Top Posters In This Topic

When a failure has occurred, the dishwasher will continuously beep every second and the Start/Pause indicator light will be red.

The error code will be displayed with the red light indicators on the wash cycle panel. (For specific failures see the illustrations below.)

To solve a failure issue

1.Press the Power button to remove the error code.

2.If the error code and continuous beeps cannot be removed by pressing POWER, turn the power off at the power supply.

3.Check the chart below and correct the failure wherever possible.

4.After attending to the failure, turn the dishwasher on at the power supply.

5.If the error code and continuous beeps remain, turn the water and power supply off to the dishwasher.

6.Call your authorized service center. (See “Assistance or Service.”) Advise the technician of the error code that has appeared on the dishwasher.

Error Codes RINSE Flood switch has been activated.

(if it's not beeping, then it's just the Rinse Aid is empty)

Link to comment
Share on other sites

No Service Manual?  Thanks for the reply.  Do you have the "chart" or "illustrations" that your reply refers to?

Link to comment
Share on other sites

You're awesome!  Thank you!  Tells me everything I need to know.  I think you're right.  The tech sheet looks like F&P, but this WP model is pretty much the same.  Mucho domos.

Link to comment
Share on other sites


×
×
  • Create New...