Red LED lights keep blinking as if it has a "mind of it own"
Appliantology Parts Search Box
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Asko Dishwasher 1805 Service Manual Request
Started by Ritz, Aug 14 2009 02:51 PM
5 replies to this topic
Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
#2
RegUS_PatOff
-
- Grand Master Funk
-
- 30,198 posts
Sensei
- Location: USA
- Flavorite Brew:Chief NTSC Black & White
Posted 14 August 2009 - 05:38 PM
[user=49422]ReliableApp[/user] wrote:
which lights ?Red LED lights keep blinking ...
.
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
#3
Ritz
-
- Chief Appliantologist
-
- 435 posts
Kohai
- Location: USA
Posted 15 August 2009 - 04:42 AM
The lights on the control panel/selector buttons:
There are 8 total. Sometimes its all 8 lights on the
control panel and sometimes 4 of them flash with the other 4 staying on.
There are 8 total. Sometimes its all 8 lights on the
control panel and sometimes 4 of them flash with the other 4 staying on.
Attached Files
-
00143234[1].jpg 7.96K
22 downloads
-
00143234[1].jpg 7.96K
22 downloads
#4
RegUS_PatOff
-
- Grand Master Funk
-
- 30,198 posts
Sensei
- Location: USA
- Flavorite Brew:Chief NTSC Black & White
Posted 15 August 2009 - 06:01 AM
FAULT INDICATIONS
L3 and L7 and display .F1. is blinking: Heating element fault.
L1-L8 and display .F2. is blinking: Overfill.
L4 and L5 and display .F3. is blinking: Sensor fault.
L6 and L7 and display .F4. is blinking: Water inlet fault. (Just machines with level sensor).
L1-L4 in sequence with L5-L8: The door is open during machine operation.
L3 and L7 and display .F1. is blinking: Heating element fault.
L1-L8 and display .F2. is blinking: Overfill.
L4 and L5 and display .F3. is blinking: Sensor fault.
L6 and L7 and display .F4. is blinking: Water inlet fault. (Just machines with level sensor).
L1-L4 in sequence with L5-L8: The door is open during machine operation.
.
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
#5
Ritz
-
- Chief Appliantologist
-
- 435 posts
Kohai
- Location: USA
Posted 15 August 2009 - 06:34 AM
It appears it could be
L1-L4 in sequence with L5-L8: The door is open during machine operation.
L1-L8 and display .F2. is blinking: Overfill.
But i'm having a hard time with this.
When the door is open the machine continues to run. Water does not spray, just valve operation opening closing draining etc... is this normal?
Operation of the machine seems normal except for the mentioned above and very little water getting into machine.
Because of the inconsistency I was diagnosing this as the circuit board?? Now I dont know.
L1-L4 in sequence with L5-L8: The door is open during machine operation.
L1-L8 and display .F2. is blinking: Overfill.
But i'm having a hard time with this.
When the door is open the machine continues to run. Water does not spray, just valve operation opening closing draining etc... is this normal?
Operation of the machine seems normal except for the mentioned above and very little water getting into machine.
Because of the inconsistency I was diagnosing this as the circuit board?? Now I dont know.
#6
RegUS_PatOff
-
- Grand Master Funk
-
- 30,198 posts
Sensei
- Location: USA
- Flavorite Brew:Chief NTSC Black & White
Posted 15 August 2009 - 08:49 AM
some diagnostic info PM'd
.
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
one of my video productions: “Easter Seals: Walk With Me”
every day is Down Syndrome Awareness Day
"A Child Is Waiting" . Burt Lancaster . Judy Garland . 1962
RegUS_PatOff > www.youtube.com/watch?v=oPAY2LsKVEw
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
Your Sometimes-Lucid Host:
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."
ApplianceGuru.com | AppliancePartsResource.com | Fixitnow.com
