Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Fisher Paykel DD602


RVChaser

Recommended Posts

I recently removed my lower drawer to dry up water from a leak activating the float switch. After I put the drawer back in I now have no lighting for the handle LCD display. The unit chirps when you open the drawer and I have an light on the LCD on the touch pads(cycle pad). I even replaced the handle LCD from the top to make sure the Unit wasn't defective but had the same result. The bottom drawer worked fine before I removed it.

Link to comment
Share on other sites

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • RVChaser

    3

  • J5*

    1

Top Posters In This Topic

make sure that the display cable is connected correctly and plugged into the control unit ,

if you still have no joy then you have a fault control module

Link to comment
Share on other sites

I plugged and replugged the connector numerous times thinking the same thing. I'm puzzled why the controller would go bad by just removing the drawer. I suppose I can swap the module from the drawer above for a test?

Link to comment
Share on other sites


×
×
  • Create New...