Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Manual & tech sheet for Kenmore (Whirlpool) 110.96272100


DigiPlumr

Recommended Posts

My mother's 14-year old dryer needs a little helping hand.  Getting low heat only in auto.  The tech sheet's missing :X.  Anyone have one I could borrow?

Link to comment
Share on other sites

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • Samurai Appliance Repair Man

    2

  • DigiPlumr

    2

Popular Days

Top Posters In This Topic

Posted Images

  • Team Samurai

This is the older Whirlpool-built unit with the lint filter on the top panel. This diagram may be close enough:

00000106.png

Are you saying that timed mode will only give high heat? Or no heat in any mode other than auto?

Link to comment
Share on other sites

Arigato, Sensei.

Unfortunately, it was not quite the correct tech sheet and was missing the timer information.  However, all is not lost, in fact, all is well.  A friend was able to photograph the tech sheet on his dryer which is identical to mine (except his does not say Kenmore on it).  I have attached it for the viewing pleasure of future grasshoppers.

Oh, and the problem?  Lint covering the operating thermostat.  It was keeping it hotter longer than the actual air temp, apparently.  After a thorough service clean inside and out, as well as a new belt (because I'm not going to take it apart again anytime soon), all is right with the world--and clothes dry in a reasonable amount of time.  :D  The vent?  Perfectly clean, swept out by father weeks ago as part of his twice-annual house maintenance.

post-59206-129045115174_thumb.jpg

Link to comment
Share on other sites

  • Team Samurai

Nice work! :thumbsup:

And domo for the update!

Link to comment
Share on other sites


×
×
  • Create New...