Need appliance parts? Call 877-803-7957 now or use the parts search box:

Parts Search

Learn appliance repair at online the Master Samurai Tech Academy.  Learn more.  Earn more.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

  • Announcements

    • Samurai Appliance Repair Man

      ***READ THIS PRIOR TO STARTING A NEW TOPIC***   05/02/2016

      Topics with the complete and accurate model number in the topic title will get priority attention. You can validate your model number by entering into the form on this page: http://www.repairclinic.com/?clearLs=true For more help on using Appliantology effectively, please see this page:  
kickin00

Broiler doesn't work

10 posts in this topic

Kenmore model #362.7351190

The broiler won't light. Cooktop and oven operate fine. I have removed the igniter, it reads 80 ohms resistance. The new part from Sears reads 65 ohms resistance. I do not read any voltage going to broiler igniter when broiler is turned on. I hear a relay click, but no igniter and no gas. The relay click is in the top portion of the stove. It's not a click from the gas valve.

One appliance repair center thought maybe that there might be a relation to having used the self cleaning function on the oven roughly three weeks ago. We can't recall if we have used the broiler since then.

Any advice you can give me would be appreciated.

Thanks.

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

Post your model number!

Test the continuity of the safety valve where the wires connect to it. Remove at least one wire from the valve before measuring continuity. If it reads open, it's bad.

gas_range_components.jpg?dc=4675399381206464118

Share this post


Link to post
Share on other sites

I did post my model number, but it didn't show up. My stove model number is Kenmore 362.7351190. I will let you know when I check the safety valve. Thanks.

Share this post


Link to post
Share on other sites

I figured out the problem, it was a bad connection on the circuit panel.  Thanks for your help!

Share this post


Link to post
Share on other sites

Nice shootin', Hoss!  :armed:

Share this post


Link to post
Share on other sites

The oven controls started making a churning sound.  It turns off and flashes f - 1

Share this post


Link to post
Share on other sites

Verison.net you want to post a brand and model and serial number???

Share this post


Link to post
Share on other sites

F-1 usually means:

 

F1 Electronic range control failure.

1.  Replace electronic range control (ERC).

But cannot be sure since we do not know what  brand this and what style without the model number.

Share this post


Link to post
Share on other sites

This stove is a Kenmore model #362-7351190, Serial #17204902P

Share this post


Link to post
Share on other sites

Looks like the same range is in two differents threads...:?

Share this post


Link to post
Share on other sites