Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. 
      I'll be posting a couple more tech sheets before Saturday so be sure to follow this event to keep up with the tech sheets we'll be going through. 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Fisher & Paykel DS602 service manual?


bounding_catfish

Recommended Posts

Mr. Samurai,

This humble grasshopper hopes to achieve inner peace with the careful guidance of the Service Manual for the Fisher & Paykel DS602 DishDrawer. Could you direct me to this blessed document?

Thank you

Link to comment
Share on other sites

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • RegUS_PatOff

    2

  • allelopath

    1

  • bounding_catfish

    1

  • 2 months later...

F4 No temperature increase has been recorded when the element is on.

The element is not connected.

The element has gone open circuit.

Temperature sensor or electronics ADC has failed.

 

service manual link PM'd

Link to comment
Share on other sites

×
×
  • Create New...