Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Service Manual Sub Zero 550


sportevo

Recommended Posts

I'm looking for the service manual for a Sub Zero 550 and any other assorted literature on it that you may have, i.e. Operation Manual etc.  Thanks...

Link to comment
Share on other sites

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • cvstock

    2

  • RegUS_PatOff

    1

  • sportevo

    1

Popular Days

Top Posters In This Topic

  • 4 weeks later...

Also looking for repair manual for sub zero 550.  Have a big problem with the switches on back of freezer wall that turn on icemaker, lights and fan.  Lights not working, bought switch, but when you pull out switch, there's no slack in wires and can't get wires on to new switch.  And now a connector fell off one wire.  What does sub zero expect someone to do when any of these switches fil??

Link to comment
Share on other sites

Last word should be "fail", not "fil. sorry, long day.

Also looking for repair manual for sub zero 550. Have a big problem with the switches on back of freezer wall that turn on icemaker, lights and fan. Lights not working, bought switch, but when you pull out switch, there's no slack in wires and can't get wires on to new switch. And now a connector fell off one wire. What does sub zero expect someone to do when any of these switches fail??

Link to comment
Share on other sites


×
×
  • Create New...