Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

GE washer WWSE5240G0WW


tech1911

Recommended Posts

  • Replies 10
  • Created
  • Last Reply

Top Posters In This Topic

  • tech1911

    5

  • RegUS_PatOff

    4

  • appl.tech.29501

    2

The model I am working on has a inverter board on the motor. I dont think that manual will be accurate to help diagnose this washer. If you have a manual that has the inverter board on the motor, I would appreciate it. Thanks for your help

Link to comment
Share on other sites

yes, i'll have to look for the manual if you'll still need it

but here's some other info

RegUS_PatOff wrote:

.....

&%^$#&&^##  GE model numbers ..

http://fixitnow.com/wp/2009/11/10/ge-hydrowave-top-loading-washer-wont-run/

GE Washer Inverter Motor Error Codes.pdf

http://applianceguru.com/forum2/21714-1.html

 

 

Link to comment
Share on other sites

I do still need the manual if you can find it. I have the inverter board status light codes, but I do not believe the motor is bad (2 blinks), and the belt is not slipping.

Link to comment
Share on other sites

I think I have your cure but notes are at my house, I will post back when I get home

Link to comment
Share on other sites

maybe this one 31-9145

link PM'd

[align=left]Profile Washers With Electronic Control and Mode Shifter Assembly[/align]

WPRE6100

WPRE8100

Link to comment
Share on other sites

2 flashes means that the tub hub nut is loose. Tighten nut and to clear fault disconnect power to washer for 15 seconds, reconnect power and open and shut the lid 5 times within 30 seconds

Link to comment
Share on other sites

Thanks. I had already replaced the hub nut, old one threads were stripped and tub loose. Then it would fill and drain only. I did not clear the code, will do tomorow. Will this POS machine not agitate or spin if the problem was fixed, but code was not cleared?

Link to comment
Share on other sites

[user=60379]tech1911[/user] wrote:

... Will this POS machine not agitate or spin if the problem was fixed, but code was not cleared?
NOTES:

ERROR #

#4 The Motor continues to operate with this error.

#6 When a locked Rotor is detected, the Washer will sit idle for 15 seconds and retry.

If the Motor does not operate after 3 tries, the LED blinks 6 times.

#8 The Motor continues to operate at reduced performance levels.

#9 Maximum Spin speed is limited to 50 RPM.

Critical Errors, #1, #2, & #7, will prevent Inverter/Motor from operating.

To clear errors, disconnect power until a clicking sound is heard (approximately 15 seconds).

Open and close the Lid 5 or more times in any 12 second period within the first 30 seconds of power-up.

Errors will not clear if Washer is in either Agitate or Spin mode.

Link to comment
Share on other sites


×
×
  • Create New...