FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
LG WM2050CW washer $ 488 free delivery
#21
Posted 09 July 2010 - 09:49 PM
He replied "Why would we do that?"
Helps keep costs to a minimum.
I have not seen the inside of a "local parts house" for at least 5 years.
All inventory is ordered (or re-ordered via internet).
Less waste of time commuting for me to the "house".
Parts arrive within 2 business days. Keeping a realistic inventory on-hand is the key to success.
Have you ever worked on an LG dishwasher? I had to replace a complete wiring harness, a door liner, pump and motor assembly AND a control board on an LG dishwasher.
Good God--yes.
Problably replaced--ballpark--some 400 to 500 SUMP ASSEMBLIES on LG dishwashers built from 2004 thru early/mid 2008. Most of them under warranty.
The reason that LG shipped the ENTIRE wire harness--was due to this being literally sent "as is" from the manufacturing process. It does NOT mean that you *must* replace the entire wire harness---just the damaged section (splice & secure).
The LG dishwasher (compared to other tall tub designs NOT the traditional d/w) is the easiest to diagnose and service.
I've got almost 30 years as an appliance servicer to back-up that statement.
Musty odor
L-O-N-G cycle times
Dingy/yellowing whites
Suds error message
Slow spin speeds
Intermittent water leaks (from rear of washer)
And other annoying symptoms which vary brand-to brand.
Read below:
The *correct* amount of HE (High Efficiency) detergent that should be used in any front load or agitatorless top load washer with tub sizes 3.0 cu ft and larger is as follows:
HE: (2) Tablespoons Per Wash Load
HE 2X: (1) Tablespoon
HE 3X: (1) Teaspoon
Perform a TUB CLEAN CYCLE every (4) months.
Use: "Tide Washing Machine Cleaner"
#22
Posted 10 July 2010 - 07:52 AM
There's no black and white. No one can say which is best. WHat if you live in a country that doesn't make cars? Every car is foreign.
The German WP is OK because the profits go to WP which is in USA? OK but what about all those workers in Germany you supported?
A US built Toyota is bad because the profits go to Toyota in Japan? Waht about all the US assembly workers? Do you wish not to support them?
Wrinkle: I live in Canada. There's no Canadian car maker. The profits will go outside Canada. I can buy something made by Canadian workers though. Should I choose the profits go to the US rather than Japan? They're both foreign, and I have nothing against Japan. In fact we probably have more cause to have a problem with US policies than Japan? Or Germany? I know those were once enemies of USA but those enemy nations do not exist anymore. And a country that is a large trading partner is part of your economy and it helps your economy to spend there as much as it does to spend it in your own country. It's a global economy. A former autoworker who was given the golden dildo by GM Chrysler or Ford should not feel inclined to help or defend his former employer anyway.
And it gets very foggy as to where a car is made. I don't know if this happens with appliances, but for example the Ford Crown Victoria is considered Canadain made. There are many cars assembled in Canada but this is the only big 3 that is an Import in the eyes of the EPA because of the % content and labour that is not US sourced.
And what if a person wishes not to support the UAW or the CAW? One might want to put his spending into his home land but has a legitimate beef with the UAW and it's his perfect right not to support them.
Appliances? There's some manufacturing here in Canada but their names don't go on the front of machines. I'd be severely limited in my choices but I would be helping local workers.
It's great to support your local economy by putting your spending into it, but the debate over whether it's the worker or the company that matters will never be closed, because different people(with spending money) have different views and needs. I tend to lean toward worker. I think that has a quicker impact, if you're talking trickle down and helping keep your own job.
Nationalism, patriotism jingoism, those are all emotional factors that should not influence your choice, IMO. My country is not better than another because of an imaginary line. My regard is equal for people of all nations, and my judgement on them is for their actions not their location. All North Americans have near ancestry from Europe or Asia or Africa(not counting the natives, whom we treat like aliens). So we might offend someone on this board by expressing anything negative about a German washer for example, not to mention this board being open to users who reside in all those "foreign" lands.
The last point is hypocracy. Is every component in your home made by a domestic company or even by workers in the US? Check your TV and your clock radio, your ceramic tiles and hardwood, cabinets, kitchen table, why, we even have things we ar PROUD to tell people are imported! Anyone have bamboo floors? It doesn't grow here!
#23
Posted 10 July 2010 - 07:44 PM
Here in Cleveland, (my ex-employer, Ford Motor Company) is right in my backyard. Ford has been very good to me and my father over the years. I chose to take the buyout because I did not want to relocate to Chicago, Illinois.
I am also a Canadian who was born in the USA. Before I was born my parents lived in Oakville, Ontario where my father worked at the Ford plant.
Also, here in Ohio Whirlpool Corporation has three assembly plants.
The Clyde, Ohio washing machine plant where all the Whirlpool top loader machines are built, including the Cabrio. It is THE largest washing machine plant in the WHOLE world, not the country, the world. They have been assembling top loader washing machines there since the 1920s. Thanks to Sears.
The Findlay, Ohio dishwasher plant.
The Marion, Ohio dryer plant.
Here in Ohio, manufacturing accounts for a big chunk of the local economy. We need to keep these plants here.
#24
Posted 10 July 2010 - 08:10 PM
******************
What??? Come again?
<<<it helps your economy to spend there as much as it does to spend it in your own country. It's a global economy>>>
<<<And what if a person wishes not to support the UAW or the CAW? One might want to put his spending into his home land but has a legitimate beef with the UAW and it's his perfect right not to support them.>>>
<<<Nationalism, patriotism jingoism, those are all emotional factors that should not influence your choice, IMO.>>>
<<<The last point is hypocracy. Is every component in your home made by a domestic company or even by workers in the US? Check your TV and your clock radio, your ceramic tiles and hardwood, cabinets, kitchen table, why, we even have things we ar PROUD to tell people are imported! Anyone have bamboo floors? It doesn't grow here!>>>
Musty odor
L-O-N-G cycle times
Dingy/yellowing whites
Suds error message
Slow spin speeds
Intermittent water leaks (from rear of washer)
And other annoying symptoms which vary brand-to brand.
Read below:
The *correct* amount of HE (High Efficiency) detergent that should be used in any front load or agitatorless top load washer with tub sizes 3.0 cu ft and larger is as follows:
HE: (2) Tablespoons Per Wash Load
HE 2X: (1) Tablespoon
HE 3X: (1) Teaspoon
Perform a TUB CLEAN CYCLE every (4) months.
Use: "Tide Washing Machine Cleaner"
#25
Posted 11 July 2010 - 10:40 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Your Sometimes-Lucid Host:
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."
ApplianceGuru.com | AppliancePartsResource.com | Fixitnow.com














