Jump to content
Click here to check out our on-demand appliance repair training webinars.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Jacuzzi Z112


dave42

Recommended Posts

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • dave42

    2

  • RegUS_PatOff

    1

  • appl.tech.29501

    1

Popular Days

Top Posters In This Topic

Can't find a manual, but may be able to help. What kind of problem are you having?

Link to comment
Share on other sites

We had a problem that the pump only runs on low speed. The pump/motor was replaced and then the switch/sensor that is attached to heater was replaced. Seemed to be working fine, then after 2 days, the same problem recurred.

When tub is plugged in (110 V), the pump/jets run at low speed, and heater light is steady red. When we try to increase speed, the motor makes a humming sound, and the light on the GFCI plug goes off momentarily. The pump then continues to run at low speed. The circuitboard was replaced about 2 yrs ago. We noticed some tarnish on the contacts of the power plug and cleaned that off, but that did not help. Thanks.

Link to comment
Share on other sites

I don't know if this info will help, but it's all I could find.

Jacuzzi Spa Electronic Control System Troubleshooting Guide G647000 7-95.pdf

Jacuzzi Electrical Section 7348000E 4-97.pdf

 

 

Link to comment
Share on other sites


×
×
  • Create New...