Jump to content
LIMITED TIME OFFER: Use code 10YEARS10 to get 10% off your Appliantology membership. Click here for more ×
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Service Manual Request


morezan

Recommended Posts

  • Replies 5
  • Created
  • Last Reply

Top Posters In This Topic

  • RegUS_PatOff

    2

  • appl.tech.29501

    2

  • morezan

    2

Popular Days

Top Posters In This Topic

It's actually with the icemaker, GE WR30X0289. The shut off arm will no longer stick in the up position. I would have expected a tab on the outside casing, but there does not appear to be one. Nor is there anything inside the unit to indicate how the arm was held in place. So I'm looking for a parts blow up or service manual. Thanks for your help.

Link to comment
Share on other sites

Mostly likely the housing itself is damaged (which is no longer available).

If you reremove the cover, screws, and plate you will see the damage. I believe the only parts that are still available are the 2 plastic gears on the front.

The IM6 is the replacement fot this icemaker

Link to comment
Share on other sites

 

this Housing ?

click on picture $ 46

00048322.jpg

click on picture IM6 $ 100 (Rocker ON/OFF Switch)

00324384.jpg

click on picture $ 101   ? ?  (Slide Switch ON/OFF)

00487746.jpg

Link to comment
Share on other sites

Yep that would be the housing, not sure why I'm showing NLA. At any rate ya need to open it up and verify the destruction....if you decide to replace I would go with the one in "REGS." Last picture..its and updated version.

Link to comment
Share on other sites


×
×
  • Create New...