Need appliance parts? Call 877-803-7957 now or use the parts search box:

Parts Search

Learn appliance repair at online the Master Samurai Tech Academy.  Learn more.  Earn more.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

newatthis

Kenmore dryer

2 posts in this topic

Hi,

I have an electric  Kenmore dryer model 110.86984110. My dryer does not heat. do I have to remove the drum to get at the heating element.

thnks,

newatthis

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

I'm assuming your dryer runs...but no heat.  On your model if you drop the bottom panel you will see the the heating element on the right side.  Two clips on the right and left side of the panel, just push in with a putty knife.   Before you go replacing the element check the thermal cut off,  this is on the left side of the heater box last one toward the back. If this is open, you will not get heat.  You may also want to check to see if you lost a leg of power on the supply before you get into this.  Be sure to have the unit unplugged before you go checking this element and cut-off or you could light up the world....Ron

Share this post


Link to post
Share on other sites