Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Kenmore 665.16835792

atcherservice

By atcherservice
in DIY Appliance Repair Help

Recommended Posts

atcherservice

atcherservice

Posted
Posted

I have a KM Dishwasher m#665.16835792 that after all of the cycles and final drain/rinse cycle, I still have a 1"-2" of standing water. The unit has a extra rinse and drain button that has to be pushed to drain the tub. All cycles seem fine but when there is a drain cycle the amount of pressure that is flowing out of the unit seems a bit weak. I am the 2nd guy to see this unit, last tech states everything work fine. Any suggestions?

Link to comment
Share on other sites
  • Replies 3
  • Created
  • Last Reply
  • Team Samurai
Samurai Appliance Repair Man Sensei

Samurai Appliance Repair Man

Posted
  • Team Samurai
Posted

Does the drain connect to a disposal? If so, these are famous for collecting gookus and restricting the discharge flow.

Link to comment
Share on other sites
atcherservice

atcherservice

Posted
  • Author
Posted

I snaked the air gap and drain line-clean as can be. When I hit the extra rinse and drain button it will drain out to the bone? Puzzled -that I am master

Link to comment
Share on other sites
  • Team Samurai
Samurai Appliance Repair Man Sensei

Samurai Appliance Repair Man

Posted
  • Team Samurai
Posted

So, only time there's trouble draining is when there's detergent in the tub? That makes me wonder about the detergent: what kind, how much they're using, changed brands lately, etc.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
×
×
  • Create New...