Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Maytag manual #16025628


certified tech group 51

Recommended Posts

This manual is for the I/M with the reversing auger motor for the dispenser for Maytag model MSD2652KGB........Auger motor will only rotate counterclockwise in either crushed or cubed......all you get is cubed.......

Link to comment
Share on other sites

  • Replies 2
  • Created
  • Last Reply

Top Posters In This Topic

  • certified tech group 51

    2

  • appl.tech.29501

    1

Top Posters In This Topic

A.T. 29501...thanks for the manual...On the refer  supplied tech. sheet, it  said for i/m tests, see manual 16025628.....  I was expecting about a 10 to 15 page I/M trouble shooting guide...........( like the W/P   I/M )  It turns out I had the service manual in the file drawer..Thanks for the quick service...................I think I will make a " I/M only " book to carry in the van....

Link to comment
Share on other sites


×
×
  • Create New...