I have a GE Electric Convenction built-in oven model #JTP18COD1CC
The display beeps for several minutes and then displays "F7" & all functions become locked/disabled. I followed the troubleshooting tips & disconnected all power and then reconnected with the same problem. Any suggestions? THANKS in advance
Appliantology Parts Search Box
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Built in oven malfunction PLEASE HELP!
Started by taylor97, Apr 21 2005 06:00 AM
9 replies to this topic
Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
#2
mopar X
-
- Master Appliantologist
-
- 76 posts
Yamabushi
Posted 21 April 2005 - 06:34 AM
Replace touchpad and control board
#3
taylor97
-
- Grasshopper
-
- 5 posts
Samanera
Posted 21 April 2005 - 07:22 AM
Thanks for the advice, but I imagine it is one or the other, how do I know if I should replace the ERC or the touchpad?
#4
Samurai Appliance Repair Man
-
- Fermented Grand Master
-
- 24,203 posts
Your Sometimes-Lucid Host
- Location: USA
- Flavorite Brew:Kirin Ichiban
Posted 21 April 2005 - 07:29 AM
[user=310]taylor97[/user] wrote: 
You can apply my proprietary component isolation technique.how do I know if I should replace the ERC or the touchpad?
FAQs | Parts | Memberships | Consultations | Repair Videos | Newsletter | Beer Fund | Contact
#5
taylor97
-
- Grasshopper
-
- 5 posts
Samanera
Posted 21 April 2005 - 07:39 AM
Thanks for your help, a couple more questions before I try this. As I am somewhat handy, so I hope I can do this myself without calling out repair service.
1. Is there a way to cut the power to the range besides the circuit breaker?
2. What will the ribbon connector look like that needs to be disconnected?
3. I assume to get to the ERC, I just start unscrewing parts from the touchpad?
Thanks again:)
1. Is there a way to cut the power to the range besides the circuit breaker?
2. What will the ribbon connector look like that needs to be disconnected?
3. I assume to get to the ERC, I just start unscrewing parts from the touchpad?
Thanks again:)
#6
The Seven
-
- Master Appliantologist
-
- 190 posts
Sōhei
Posted 21 April 2005 - 07:52 AM
[user=310]taylor97[/user] wrote:
If it could beep and display "F7", the ERC is not likely to be bad.
So bad touchpad and/or poor connection could be the cause.
Follow Samurai's "my proprietary component isolation technique" if you like!
The display beeps for several minutes and then displays "F7" & all functions become locked/disabled.
If it could beep and display "F7", the ERC is not likely to be bad.
So bad touchpad and/or poor connection could be the cause.
Follow Samurai's "my proprietary component isolation technique" if you like!
The Seven
#7
Samurai Appliance Repair Man
-
- Fermented Grand Master
-
- 24,203 posts
Your Sometimes-Lucid Host
- Location: USA
- Flavorite Brew:Kirin Ichiban
Posted 21 April 2005 - 09:01 AM
[user=310]taylor97[/user] wrote:
1. On a wall oven, no.
2. It's the only thing connecting the touchpanel to the ERC.
3. Couple of screws on the bottom of the panel. Piece of pie. Cut power first.
1. Is there a way to cut the power to the range besides the circuit breaker?
2. What will the ribbon connector look like that needs to be disconnected?
3. I assume to get to the ERC, I just start unscrewing parts from the touchpad?
1. On a wall oven, no.
2. It's the only thing connecting the touchpanel to the ERC.
3. Couple of screws on the bottom of the panel. Piece of pie. Cut power first.
FAQs | Parts | Memberships | Consultations | Repair Videos | Newsletter | Beer Fund | Contact
#8
taylor97
-
- Grasshopper
-
- 5 posts
Samanera
Posted 21 April 2005 - 10:13 AM
Thank you all so much for all the advice, I will let you know how it goes! :D
#9
Russ Man
-
- Master Appliantologist
-
- 5 posts
Samanera
Posted 21 April 2005 - 10:26 AM
[user=310]taylor97[/user] wrote:
I have changed a lot of ERCs and touch pads on GE ovens....it definitely sounds like a bad touch pad if it continues to beep and then goes to F7.Thank you all so much for all the advice, I will let you know how it goes! :D
#10
taylor97
-
- Grasshopper
-
- 5 posts
Samanera
Posted 21 April 2005 - 05:20 PM
Well, I disconnected the ribbon connector, and no F7! So, it looks like I will be purchasing a new touchpad. Thanks so much for all your help appliance guru 
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
FAQs | Parts | Memberships | Repair Videos | Newsletter | Beer Fund | Contact
Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!
Your Sometimes-Lucid Host:
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."
ApplianceGuru.com | AppliancePartsResource.com | Fixitnow.com
