Jump to content
Click here to check out this guide.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

UltraSoft 625.388800 constantly running water to drain


brk

Recommended Posts

Starting last week (two weeks after I tried Potassium instead of Sodium chloride), my water softener started acting up.

Initially it had errors on the screen.  I unplugged and retried and the errors went away (no, I don't remember the message :( ).  Then I noticed that it was constantly running water to the drain line regardless of the cycle.  It sounds like the rotor is moving when the cycle changes, but can't be sure anything is actually turning. 

Where do I start?  Is it worth a repair on an old water softener?  Do I need to worry about the Rosin bag longevity as well?

Link to comment
Share on other sites

  • Replies 2
  • Created
  • Last Reply

Thanks! I have the install manual, but hadn't found the other manual. Advancing the cycle to service in manual mode seams to have done the trick. Will run an overnight cycle and see what happens.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...