Jump to content


Use this Search Box to Find Appliance Repair Help Now
Need help finding your model number?
365-day return policy on all parts purchased here, even electrical parts that have been installed!


FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Welcome to Appliantology.org, the Web's Premiere Appliance Repair Resource!

The world-famous Samurai Appliance Repair Forums


You can post a question and get repair help for FREE! Click here to get started.


Already a member of the Appliantology Academy? Just sign in with your username and password in the upper right-hand corner of the screen.

 


Photo

water and soap and stink and backup and toilets


  • Please log in to reply
4 replies to this topic

#1 neehowhenhow

neehowhenhow

    Yamabushi

  • Chief Appliantologist
  • PipPip
  • 93 posts
  • Location: USA
  • Flavorite Brew:Pete's wicked

Posted 06 July 2010 - 03:21 AM

Greetings all!

I hope that this is posted in the right place!

We have a problem with our drainage; ie. toilets sinks showers and septic.

I plan on calling to have the septic drained, its been over 18 months (yikes)

Last night, our basement toilet was overrun with soap bubbles. The soap smelled like coconut, because just an hour earlier the girls took a bath 2 floors up with their coconut shampoo.

We have 4 toilets, 4 sinks, 2 tubs, and 1 shower that seem to be on one drain circuit.We have 3 floors. 1960's home.

This morning, my dear husband was shaving in the top floor bathroom and the sink he was using filled with coconut soap.

Now, on top of this, we have an ongoing situation with the 2nd floor toilet (off the kitchen) that never flushes completely and in the winter time, wreaks of septic.

We have thought about getting all our lines snaked, and replacing the 2nd floor toilet (see below).

What do you think is the best plan of attack?

Any insight on how to combat our septic drama would be greatly appreciated! 

Thank you so very very much!
I embrace that which I cannot change...
Housework RULES!

Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

#2 RussTech

RussTech

    Kohai

  • Master Appliantologist
  • PipPipPip
  • 309 posts
  • Location: USA
  • Flavorite Brew:Heineken

Posted 03 January 2012 - 11:28 PM

Haha, pump the septic, plan on snaking all your lines, and get that second story stool vented properly.
Your household plumbing is in need of some love and maintenance.

#3 jumptrout

jumptrout

    Sensei

  • Appliantology Fellow
  • PipPipPipPipPip
  • 1,380 posts
  • Location: USA
  • Flavorite Brew:Coors Light

Posted 04 January 2012 - 09:46 AM

Pay special attention to your drain field lines leaving the tank.
Eighteen months on a tank pump out is too soon.
Are sanitary napkins being flushed?

#4 certified tech group 51

certified tech group 51

    Sensei

  • Appliantology Fellow
  • PipPipPipPipPip
  • 2,546 posts
  • Location: USA

Posted 04 January 2012 - 11:52 PM

Septic tanks could go up to 10 years between pumping if used properly.. .. SEPTIC TANK....the only things that should be going into it , is what has been processed thru you...I.E. sh*t and p*ss and the T.P.. ( pardon my french ) .......When garbage disposers put in ground up food that needs to Decompose............ anti- bacterial hand soap the kills the living bacteria........kitchen grease that coat the top layer of the drain field that stops the water from seeping back into the ground........Too much hair shampoo...... toilet bowl cleaners........no feminine products.........ALL BAD........ ............. You just need to add baking yeast a few times a year.......It appears that the lines from the house to the tank would be a place to start, too much blockage to keep the ( only ) three previously mentioned items flowing freely....................The stack vent could be blocked with some thing ..I.E. birds nest, bats, that is stopping the air movement during the flushing/water flow and the venting of septic gas....

#5 nickfixit

nickfixit

    Sensei

  • Appliantology Fellow
  • PipPipPipPipPip
  • 2,182 posts
  • Location: USA
  • Flavorite Brew:Glen Livit

Posted 10 January 2012 - 10:18 PM

After the septic is pumped out, and ask the guy if the system is suited to the family size and water usage. Then, I would have a real plumber evaluate the home plumbing system and perform the needed modifications and maintainence. Use a company that can run a camera through the lines to check them out. The newer process of "water-jetting" the drain lines instead of just snaking them will clean out the entire inside of the pipes.

Also you might want to try to take steps to reduce the ammount of water you are putting into the system. You might just be putting out more than the leach field can take. A High Efficiency washer would help if you are using a standard washer. So would flow restriction facuets and shower heads. If you toilets are old, 3 gallon flush, replace them with 1.6 gal flush models.
" Giving numerical data to Sears management is like giving a monkey a machine gun. No one knows for certain what will happen, but you can be sure of two things... It will be real messy, and only the monkey will be unharmed"




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users


FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

Your Sometimes-Lucid Host:
Samurai Appliance Repair Man
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."


The Appliance Guru | Master Samurai Tech

Real Time Analytics