Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Kitchen Aid Refrigerator model KSRS25FGBT02


Recommended Posts

  • Replies 13
  • Created
  • Last Reply

Top Posters In This Topic

  • llky

    8

  • appl.tech.29501

    6

Top Posters In This Topic

having trouble with the icemaker - dispenser.Sometimes the icemaker will make a noise,but doesnot make ice.The dispenser ,crusher thing does not work either.Need take apart help and how to and what to test.

Link to comment
Share on other sites

Ok, let's tackle 1 problem at at time...

Your getting cubed ice and not crushed....if you select crushed do you get cubed or does it act dead (no noise)?

Link to comment
Share on other sites

Sometimes it does act dead,nothing at all.When you select crush,you can hear the motor come on and the augar outfit turns,but no ice movement.

Link to comment
Share on other sites

Remove the ice bin and inspect items # 32, 33 to insure the spring isn't out of whack.

The back end of 32 also needs to be inserted into the plastic plunger of item #3 when reinstalling bucket.

900

Link to comment
Share on other sites

Ok when the ice maker makes ice and you want crushed ice,the augar turns but the ice never gets into the crusher because the plastic wheel at the end of the augar is broken from the shaft.How hard is it to take this thing apart and repair it,or is it more fiseable to just replace the unit?

Link to comment
Share on other sites

Its pretty simple to repair, just look at the diagram of how it comes apart. I'll link you the part later tonight.

Link to comment
Share on other sites


×
×
  • Create New...