certified tech group 51 Posted July 22, 2010 Share Posted July 22, 2010 Have not been to the unit yet, would like to have a manual on hand..thanks Link to comment Share on other sites More sharing options...
appl.tech.29501 Posted July 22, 2010 Share Posted July 22, 2010 Try This Link to comment Share on other sites More sharing options...
certified tech group 51 Posted July 23, 2010 Author Share Posted July 23, 2010 down loading as I type....Talked to the mgr. at the motel.... the problem is..............no full rpm at final spin, clothes still wet...............will read it tomorrow in the morning in the "office"...............thanks............ Link to comment Share on other sites More sharing options...
fixyourboard Posted July 23, 2010 Share Posted July 23, 2010 I've found the guys at the Wascomat factory (NY if i recall) to be very helpful. I've needed wiring diagrams for some of their models for our test benches as we rebuild some of the wasco boards. If you need it, maybe I can find the contact info in my notes. Link to comment Share on other sites More sharing options...
Recommended Posts