Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

A.O. Smith Gas Water Heater Model FSG 40 242


wilkinson

Recommended Posts

We just returned from vacation and there was no hot water. I checked the pilot light and it is on and if I turn the thermostat dial up the flame will light on the main burner. The water is only luke warm. Any ideas on what I need to do to get hot water?

Link to comment
Share on other sites

  • Replies 4
  • Created
  • Last Reply

[user=6770]wilkinson[/user] wrote:

... the flame will light on the main burner. The water is only luke warm...

does the Flame go out at that time ?

depending on it's age.. could be a lot of sediment built up on the bottom inside if the Tank ...

Flame goes ON, heats the sediment quickly ... shuts OFF, with slower heat transfer to the Water .. 

 

Link to comment
Share on other sites

The flame on the main burner will stay on until it gets the water luke warm. If I run the hot water from a faucet for a long period of time the main burner should automatically come on. Right? It does not. The only way I can get the burner to come on is if I turn up the temperature on the dial. Could this be a thermostat problem?

Link to comment
Share on other sites

could be..

 

I didn't check the model number, but depending on age,

it could also be a deteriorated "sacrificial anode" (cold water Dip Tube)

so then the incoming cold water goes directly over to the hot water exit rather than down to the Burner ..

Link to comment
Share on other sites

I checked the aerators on a couple of water faucets and there were no plastic particles which might indicate the dip tube is ok. Would the thermocouple have anything to do with this problem? I looked at a video on youtube and it looks like a fairly simple procedure to change one out. However, if the thermostat is the problem how do I go about checking it? If it is defective is it a difficult job to put in a new one?

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...