No response from any controls on touch pad
Posted 17 September 2005 - 11:13 PM
Problem: No response from all controls on the touch pad. There is sufficient power from the outlet. A few months ago the touch pad was not responding, so I unplugged the power cord from the outlet and waited a bit and plugged the power cord back into the outlet. It worked. This time the touch pad remained dead. I tried replacing the machine control board, still dead. Does the motor control board need replacing at the same time (the fuse on this board has continuity)? Any ideas?
Posted 18 September 2005 - 09:11 AM
Posted 18 September 2005 - 09:42 AM
For service manuals and lots of other goodies, become an Apprentice ==> Apprenticeship
Posted 19 September 2005 - 09:58 PM
I found the tech sheet and ran through the diagnostics, the keypad is dead. I found a boat, and I'm seriously considering using it for an anchor. Do all washers have tech sheets inside of the front panel? BTW - Is that Calypso class action lawsuit from alexander law legit? Thank You...
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users