Jump to content
LIMITED TIME OFFER: Use code 10YEARS10 to get 10% off your Appliantology membership. Click here for more ×
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

GE Micro wave JUM15405MISS


AmTec Services

Recommended Posts

Looking for a manual for this Micro. Cust says no lights or display on screen.:shock:

............Thank you!

...............................AmTec

Link to comment
Share on other sites

  • Replies 6
  • Created
  • Last Reply

Top Posters In This Topic

  • AmTec Services

    4

  • appl.tech.29501

    2

  • RegUS_PatOff

    1

Top Posters In This Topic

Dont have a manual for this unit.

Either gonna be a bad fuse, wire, or smart board.

Link to comment
Share on other sites

Thanks for the reply. Is the power xformer built into the smart board? Is there a specific test for the board, other than visual?

.................AmTec:?

Link to comment
Share on other sites

That Mod # should be... JVM1540SM1SS

Yes the transformer is attached to the board as seen below

You need to verify that the board is getting 120 VAC via the diagram. If the board has 120 V and you have no display then the board is bad.

If I remember correctly the hot wire is broken by a cavity thermostat..I have seen a bad connection at that point a few times.

00387947.jpg

Your inline fuse it mounted to the Noise Filter assembly as seen below

00385803.jpg

Link to comment
Share on other sites

  • 2 weeks later...

Got to look @ this micro. Found the reson for no display was the MGT thermal cut out was open and no power to board.

Will pick up and replace.

I have the paperwork from inside the unit. Has a nice wiring diagram and trouble shooting flow chart. Would it be helpful if I scaned and uploaded same?

..............AmTec

 

Link to comment
Share on other sites


×
×
  • Create New...