Jump to content


Learn appliance repair at the Samurai Tech Academy.  Learn more.  Earn more.


Use this Search Box to Find Appliance Repair Help Now
Need help finding your model number?
365-day return policy on all parts purchased here, even electrical parts that have been installed!


FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Welcome to Appliantology.org, the Web's Premiere Appliance Repair Resource!

The world-famous Samurai Appliance Repair Forums


You can post a question and get repair help for FREE! Click here to get started.


Already a member of the Appliantology Academy? Just sign in with your username and password in the upper right-hand corner of the screen.

 


Photo

icemaker


  • Please log in to reply
8 replies to this topic

#1 phone_trouble

phone_trouble

    Unsui

  • Grasshoppah
  • Pip
  • 3 posts

Posted 23 April 2005 - 04:09 AM

I am having a water leak from the center screw in the icemaker that holds the extraction/freezing tray in place. Is there an O ring that can be replaced in my old icemaker or do I need to spend the money on a new one that makes those horrible half moon ice cubes. My icemaker makes nice 1 inch round icecubes that are very easy on the lips and don't cause an ice dam. The refrigerator is a Hotpoint CTF16 and we purchased it new in 1985. I have the manual for the icemaker and the with publication number 49-6348. Drawing number 468364PO2. However it only mentions the default icemaker accesory kit UK-KIT-1 that they still use today and there isn't any information that I can find online about this particular model.

Use the Appliantology Parts Search Box to Find What You Need!
Enter your model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

#2 Samurai Appliance Repair Man

Samurai Appliance Repair Man

    Shōgun

  • Master Samurai Tech
  • 29,444 posts
  • Location: USA
  • Flavorite Brew:Sapporo Original Draft Rice Lager

Posted 23 April 2005 - 04:45 AM

GE used to make a seal repair kit for this icemaker, not sure if they do anymore. 

This icemaker has long been out of production and GE has moved on to the crescent cube icemaker; it's latest incarnation is the hoary IM6.


#3 mopar X

mopar X

    Yamabushi

  • Appliantologist
  • PipPip
  • 76 posts
  • Location: USA

Posted 23 April 2005 - 04:52 AM

The part number for seal kit is WR29x144 then you need 2 tools a seal remover and installer, A new old style ice maker is part number WR30X0253 runs around 150.00 In the long run a the replacement IM6 ice maker is a better deal

#4 phone_trouble

phone_trouble

    Unsui

  • Grasshoppah
  • Pip
  • 3 posts

Posted 23 April 2005 - 06:42 AM

Thanks for the info. I can see the two seals used in this model and as for getting them out, it shouldn't be a problem. I just hate to spend $30 on two seals pluss shipping. I think I will try some soft 'o' ring seals in the meantime and see if that does the trick.

#5 Budget Appliance Repair

Budget Appliance Repair

    Sensei

  • Appliantology Fellow
  • PipPipPipPipPip
  • 4,801 posts

Posted 24 April 2005 - 02:02 AM

Don't waste your time trying to fix this without buying the kit, it's just going to continue leaking if you don't repair it correctly or replace it.

Even if you do get it apart, (NOTE FOR Mopar: Which you can do without the special seal remover tool, you just use the end of the ejector lift arm to remove the seal), you will not be able to reassemble correctly without the seal installer tool, it compresses the silver metal holding ring up into the icemaker seal cavity and holds everything in correctly.

Here's the kit you need WR29x144 CLICK HERE

The problem, you can't get the seal installer tool anymore according to RepairClinic: see note (*Washer removal and seal install tools no longer available from GE). I do think you can still get them from after market manufactures but can't tell you where, (I don't remember), and the install tool I believe cost around $15.00 also when I bought one about 10 years ago.

Ok, I did some research and RepairClinc actually sales the installer tool under the generic aftermarket manufactures #.

Here it is: TB220 $23.50 (special order-not in stock) CLICK HERE
William Burk (Willie)
Willie's Budget Appliance Repair
Eureka, CA 95501

#6 phone_trouble

phone_trouble

    Unsui

  • Grasshoppah
  • Pip
  • 3 posts

Posted 24 April 2005 - 03:04 AM

I used an old repair trick my grandfather taught me. I left the original seals in place, but coated them with axle grease and slid it all back into place. After 24 hours, there is no more leak. I will continue to watch it.
Thanks for all your help.

#7 mopar X

mopar X

    Yamabushi

  • Appliantologist
  • PipPip
  • 76 posts
  • Location: USA

Posted 25 April 2005 - 06:35 AM


Hi Willie
I knew about using the end of the ejector lift arm trick but was trying to keep it simple

#8 Budget Appliance Repair

Budget Appliance Repair

    Sensei

  • Appliantology Fellow
  • PipPipPipPipPip
  • 4,801 posts

Posted 26 April 2005 - 12:54 AM

Mopar, what you you think about this guys last post???

I left the original seals in place, but coated them with axle grease and slid it all back into place.


Think he might be having a little petroleum with his drinks now????
William Burk (Willie)
Willie's Budget Appliance Repair
Eureka, CA 95501

#9 Samurai Appliance Repair Man

Samurai Appliance Repair Man

    Shōgun

  • Master Samurai Tech
  • 29,444 posts
  • Location: USA
  • Flavorite Brew:Sapporo Original Draft Rice Lager

Posted 26 April 2005 - 02:24 AM

[user=36]Budget Appliance Repair[/user] wrote:

Think he might be having a little petroleum with his drinks now????

 

:puke:





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users


FAQs | Store | Memberships | Repair Videos | Academy | Newsletter | Beer Fund | Contact


Use the Appliantology Parts Finder to Get What You Need!
Enter a model number, part number, type of appliance, brand, or even a part description.
365-day return policy on all parts purchased here, even electrical parts that have been installed!

Your Sometimes-Lucid Host:
Samurai Appliance Repair Man
"If I can't help you fix your appliance and make you 100% satisfied, I will come to your home and slice open my belly,
spilling my steaming entrails onto your floor."


The Appliance Guru | Master Samurai Tech

Real Time Analytics