Jump to content
Click here to check out this guide.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Regency VSA, model 330 dishwasher


Technopenny

Recommended Posts

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • Technopenny

    2

  • Samurai Appliance Repair Man

    1

  • Scottthewolf

    1

Top Posters In This Topic

I don't want to put a damper on your attempt to repair this unit, but Regency went out of business almost 10 years ago and most of the parts are no longer available. 

 The most common problem with these units is that the timer and the wiring harness would get burnt, thus needing a timer and a complete wiring harness.

Link to comment
Share on other sites

  • Team Samurai

Regency went out of bidness a while back and their service info is scarce. The few times I have had to deal with Regency I called them at 800-767-3436, fax 480-998-7877, which is the Regency part and service center. The gentleman I spoke to was Jerry and he knew the product pretty well.

Link to comment
Share on other sites

Thank you, Samurai.  Happily, I was able to leave a voice mail on that 800 number, and now await a call back.  I'll say 'hi' to Jerry for you if I talk to him ;)

Link to comment
Share on other sites


×
×
  • Create New...