Whirlpool Dryer Ultimate Care
Posted 23 April 2005 - 11:43 AM
Posted 23 April 2005 - 12:48 PM
Posted 23 April 2005 - 01:21 PM
Posted 23 April 2005 - 01:28 PM
Our most dear and gracious host, Samurai Appliance Repair Man, has been instructing another grasshopper on this very subject in this topic. Scroll down toward the end of the topic and the discussion evolves into your very problem.
Posted 23 April 2005 - 01:35 PM
Posted 23 April 2005 - 02:36 PM
Posted 24 April 2005 - 01:07 AM
Your turning an easy job into something difficult. You can't get the transmission to go back up all the way because the basket has dropped down when you released the brake after removing the transmission.
With the machine leaned back against a wall turn the brake cam to release the brake and push the brake/basket drive tube assembly back up all the way into the brake drum. You may need someone to help, while you release the brake have them lift the spin basket up as high as it will go then let go of the brake release cam. With the brake locked the brake/basket drive tube will hold the spin basket up where it belongs and the transmission will install as easy as pie.
Willie's Budget Appliance Repair
Eureka, CA 95501
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users