Need appliance parts? Call 877-803-7957 now or use the parts search box:

Parts Search

Learn how to be your own tech line...

Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

Stay connected with us...

Samurai on Facebook - become a fan today! Sign up for our free newsletter and keep up with all things Appliantology. Subscribe to our YouTube channel for lots of appliance repair tips and help! Follow the Samurai on Twitter and get timely morsels of Appliantological Wisdom! Subscribe to our MST Radio podcast to learn secrets of the trade.
longtimer

Thermador PRDS364GDUS 20110081

3 posts in this topic

Thermador dual fuel range PRDS364GDUS serial 20110081

I feel like the Shoemaker that his kids all run around barefooted.

I have been putting this off for a long time.

(range is big and heavy)

This was a big mistake buying in the first place,

but I need to move on.

bake will not reach temperature (most of the time)

Broil works

Wiring and bake element checked all OK.

The biggest problem I have is not understanding or

recognizing the controls.

Control knob goes all the way around, so this is not a

strictly mechanical thermostat.

Indicator light showing temperature has been met is

consistent with low temperatures (stays on)

Oven cavity has bulb type thermostat instead of electronic sensor.

It seems obvious that it needs a new Thermostat.

I cannot identify if that is one part or several.

Unit also has a Push button switch to get the Oven mode

on/off/bake/broil/clean/convection bake.

anyone familiar with this system?

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

I've worked on a few of these but don't have a silver bullet, "It's usually this," kind of an answer for you. Sounds like you're only getting 120vac to the bake element (should be getting 240vac). I would verify that and then use the schematic to trace back the circuit that's missing the other 120vac until you find it.

I PMed you the service manual for this range.

Share this post


Link to post
Share on other sites

Thanks.

information on this range has been sparse.

I fear that the Tstat is not available.

Share this post


Link to post
Share on other sites